Construction of Nonsinusoidal Oscillation Waveform Function and Technological Parameters for Continuous Casting Mold

Zhou, Chao; Zhang, Xingzhong; Wang, Fang; Ren, Subo

doi:10.1155/2020/4165689

Cited by 4 publications

(1 citation statement)

References 11 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Zhang et al 27,28) proposed the seven section functions, which aimed at reducing the maximum acceleration, but the parameters were too many and it was inconvenient to control and optimization. Zhou et al 29,30) also proposed the seven section functions. Although the structure was simple and the maximum acceleration was lower, the acceleration curves had the inflecting points, which were unhelpful for the oscillator running smoothly.…”

Section: Introductionmentioning

confidence: 99%

Experiment and Conformation of Non-sinusoidal Oscillation Waveform Function for Continuous Casting Mold

Zhou,

Ye,

Cao

et al. 2023

ISIJ Int.

Self Cite

View full text Add to dashboard Cite

Mold oscillation is a key technology of steel continuous casting. Sinusoidal oscillation and non-sinusoidal oscillation are widely used in actual production. Non-sinusoidal oscillation has many advantages compared with the sinusoidal oscillation, such as it can reduce the depth of oscillation mark, and make slab demoulding easily. But the maximum acceleration of non-sinusoidal oscillation is higher, which will result in the larger inertia force, influence on the service life and running smoothly of the oscillator. The modification ratio of the non-sinusoidal oscillation is bigger, the impact and noise of the oscillator are more serious especially when the mold arrives at the top and bottom position. To control the maximum acceleration of the non-sinusoidal oscillation waveform, a novel waveform function with three sections was proposed. And the displacement, velocity and acceleration curves were continuous and smooth, which had no rigid and flexible impact. Thus, it had good dynamic characteristics and realized the switching between the sinusoidal and the non-sinusoidal oscillation. Then the proposed oscillation waveform function was realized by a mechanical oscillator with double servomotors arranged symmetry. Meanwhile, the angular speed of the servomotor to realize the oscillation waveform was presented and the tested curves were obtained by the experiment. The experiment results show that the oscillation waveform can be realized well, the vertical maximum acceleration of the proposed function is reduced by 13.6%, which is helpful to reduce the inertia force, enhance the motion stability and prolong the service life of the oscillator.

show abstract

Section: Introductionmentioning

confidence: 99%