Continuous lipase esterification using process intensification technologies

Abstract

BACKGROUND Nowadays, developing continuous enzymatic processes, especially when a two‐phase medium is required, remains a great challenge. So, there is a need to provide a technical solution for generating highly controlled interfacial area in a small volume. In this study, four types of reactors conventionally used for chemical process intensification and marketed by Corning, Chart Industries, NiTech Solutions and AM Technology, were tested for continuous lipase‐catalysed esterification in two‐phase medium. RESULTS The NiTech oscillating reactor proved to be the more efficient to transform the input mechanical power into mass transfer performance while proposing easily adjustable residence time. Nevertheless, Corning and Chart heat‐exchanger reactors were shown to be very suitable candidates even if mass transfer performances depend on the flow‐rate and therefore are not uncoupled from the residence time. This results in a less convenient choice of operating conditions. The Coflore system was not so convincing but it may be due to the injection device not well adapted to this system. CONCLUSION This work demonstrates that novel technologies, recently proposed for intensification of chemical processes, are indeed very suitable and provide a relevant alternative to conventional processes for enzymatic reactions and therefore for two‐phase reactions limited by the interfacial area value. Also, it has been shown here that the model reaction considered could be a simple way to characterize mass transfer performances of these technologies. © 2013 Society of Chemical Industry

Lipase esterification in the Centrifugal Partition Reactor: Modelling and determination of the specific interfacial area

“…Also, conversion was reported to decrease when mobile phase flow rate is increased because of the decrease of the residence time [2,4]. In our previous works [7] upon so-called "dynamic mixing intensified reactors" (Corning reactor, Chart reactor…) opposite results were observed. Detailed description of dynamic mixing reactors can be found in [7].…”

The Pivotal Role of Catalysis in France: Selected Examples of Recent Advances and Future Prospects.

“…Organocatalysts, organometallic complexes, metal nanoparticles, or enzymes have already been implemented using strategies based either on packed‐beds, monoliths or wall‐coating, but a lot of work remains in order to increase the lifespan of the supported catalysts and to combine different micro‐reactors together. Some examples also involve soluble forms of catalysts …”

What are the needs for Process Intensification?

“…Some of the results arising from the benchmark studies performed in our lab are detailed in Despènes et al, 2012;Elgue et al, 2014;Raimondi et al, 2014). Temperatures (utility and process) and conversion profiles.…”

“…In order to emphasize a result of such a methodology, a benchmark study has been performed at the MEPI in Toulouse based on an esterification enzymic reaction (Elgue et al, 2014). The lipase-catalysed esterification of oleic acid with ethanol has been studied in various equipments (from lab Eppendorf to continuous reactors at pilot scale) leading to the same conclusions: this esterification is limited by liquid-liquid mass transfer.…”