Controllable and Scalable Fabrication of Superhydrophobic Hierarchical Structures for Water Energy Harvesting

Abstract

We report a controllable and scalable fabrication approach for the superhydrophobic hierarchical structures and demonstrate the excellent ability to harvest water energy when applied to water-solid contact triboelectric nanogenerator (TENG). A strategy combined with multiple photolithography and micromolding process was developed to accurately regulate the diameters and the center distances of the two-level micropillars. A variety of hierarchical structures were successfully fabricated and presented the advantages of structure control, large scale, high accuracy, and high consistency. The hydrophobic property characterizations were conducted, and the results indicated that the hierarchical structures showed a larger contact angle than the single-level structures and achieved superhydrophobicity. Then the hierarchical structures were applied to water-TENGs with flowing water continuously dripping on, and the effect of the structure parameter on the triboelectric output was analyzed. The hierarchical structures exhibited a superior ability to harvest water energy than the flat film and the single-level structures due to the enhanced friction area and superhydrophobic property. At a flowing velocity of 8 mL/s, the hierarchical structure generated the output voltage of approximately 34 V and the short-circuit current of around 5 μA. The water-TENG device exhibited a power density peak of 7.56 μW/cm2 with a resistive load of 16.6 MΩ at a flowing velocity of 10 mL/s. These findings shed light on the potential applications of the hierarchical structures-based water-TENGs to water energy harvesting and self-powered sensor devices.

High‐Output Single‐Electrode Droplet Triboelectric Nanogenerator Based on Asymmetrical Distribution Electrostatic Induction Enhancement

“…The hydrophobic surface ensures the proper refresh of the solid-liquid interface when the water droplets collide continuously, which makes the water droplets contact -spreadshrink -sliding smoothly on the PTFE surface, resulting in a sound output performance of the tested surface. [15,[28][29][30] The experiment was conducted at a relative temperature of 20 °C ± 3 °C and relative humidity of 35% ± 5%.…”

A Flexible Pressure Sensor with Wide Detection Range Based on Capacitive‐Piezoresistive Dual Mode Conversion for Human‐Machine Interaction

“…At present, the main solutions for improving the sensitivity of flexible sensors include constructing microstructures of elastomers, adopting new composite active materials, and manufacturing porous elastic materials. Among them, there are various microstructures that can be constructed, such as pyramid, [11][12][13][14][15][16] micropillar, [17][18][19] two-level micropillar, [20] crack, [21] fold, [22] microsphere, [23][24][25][26] fabric, [27,28] sandpaper, [29][30][31] biomimetic, [32][33][34] and other microstructures. The presence of these microstructures can greatly improve the sensitivity of sensors.…”

Self-Reinforced Piezoelectric Response of an Electroluminescent Film for the Dual-Channel Signal Monitoring of Damaged Areas

“…The health monitoring system for polymeric structural components is an engineering monitoring system designed for real-time observation, reporting, and early warning of structural damage. , This methodology is instrumental in devising field assessment strategies for nondestructive damage monitoring across a multitude of domains, encompassing aviation, aerospace, marine sciences, and microdevices. − In recent years, embedded sensing devices have been widely employed in damage-monitoring systems for data collection and monitoring. − These systems utilize a preset threshold value to detect changes in specific characteristics of the structural component, prompting maintenance measures to improve safety and extend the component’s service life. To ensure the longevity of polymeric structural components, it is vital to intervene at the initial stages of damage, typically when the component’s coating surface undergoes mechanical and chemical degradation due to external wear .…”