Extraction of Cu(II) with dialkyldithiocarbamates and the extraction kinetics have been studied using a two-phase microflow system. The extraction behavior of Cu(II) with potassium dioctyldithiocarbamate (Kdodtc) was investigated using a batch method to determine the propertes of the synthesized Kdodtc. The extraction ability of dodtc was much greater than that of diethyldithiocarbamate (dedtc) under acid conditions. On the other hand, at higher pH values in the range of 8 -13, the extraction of Cu(II) with dodtc decreased with increasing pH. This phenomenon was ascribed to the formation of micelles and/or an emulsion, which was caused by the amphiphilic properties of dodtc. The extraction kinetics of Cu(II) was investigated using a glass microchip which was connected to microsyringe pumps and a UV/Vis capillary LC detector. The initial rate constant (k app ) determined for dodtc was greater than that with dedtc. From the relationship between the dodtc concentration and k app , it was suggested that the extraction rate was governed by the formation of the dodtc complex at the liquid-liquid interface.
IntroductionA large number of extractants have been developed for the separation of metals and removal of toxic metals from waste water. Dithiocarbamate derivatives are well-known as useful chelating extractants for heavy metals in analytical chemistry [1,2]. They have two different forms depending on the pH, namely a neutral form and a dissociated form. A major drawback of the dissociated dithiocarbamate is its protonation in acidic solution and its subsequent decomposition into carbon disulfide and the protonated amine. In non-aqueous solutions, the neutral form of dithiocarbamates is generally soluble and much more stable. To emphasize the extraction ability of dithiocarbamates in acid condtitions, it is convenient to enhance its hydrophobic nature by introducing longer alkyl chains. Although the neutral form of dithiocarbamate with long alkyl groups exhibits no adsorptivity at the interface and undergoes hardly any distribution into the aqueous phase, the dissociated form shows interfacial adsorptivity [3].Herein we report the synthesis and extraction properties of dioctyldithiocarbamate. In particular, the complexation kinetics of dithiocarbamate derivatives at liquid-liquid interfaces is examined by batch solvent extraction and a two-phase microflow system using microchip equipment. From an analytical point of view, use of a microfluidic device reduces the amount of sample required, compared with that for conventional bulk experiments. Another attractive feature of a microfluidic device is the ability to precisely control the contact time of the two phases, or the distribution rate between the aqueous and the organic phase. Thus, the kinetic study using the two-phase microflow enabled elucidation of the factors characterizing the extraction mechanism, such as diffusion, complexation, and transfer through the liquid-liquid interface.