Red‐emitting nanophosphors have a multirole in improvising the next‐generation bulk/micro/nano‐level lighting devices, particularly in refining white light quality and device performance. Nonetheless, it is difficult to synthesize nanosized phosphors with good yield and paralleled high absorption efficiency both in UV and blue regions, which is critical for modern lighting. Herein, new Mg14Ge4.99+σO24‐x+δFx: Mn4+ red nanoparticles with sizes below 100 nm are designed to improve not only the luminescence but also the blue light absorption. This approach has validated the applicability of red‐emitting nanophosphors into flexible UV and blue nitride nanowire light‐emitting‐diodes (LEDs), and commercial bulk LEDs, for the first time, with boosted intensity and color superiority for a variety of lighting utilizations. For these phosphor LEDs (pc‐LEDs), optimized red nanophosphor with an external quantum efficiency of ≈44.5%, color purity of ≈100%, and thermal stability of ≈72% at 150 °C is used. The optimized nanophosphor is combined with a flexible UV‐AlGaN/GaN nanowire LED and a blue‐InGaN/GaN‐LED. The resultant devices show promising red electroluminescence without any degradation at elevated currents. Finally, several unfamiliar LED packaging is designed with yellow and red phosphors implemented on 2 sets of double LED units to reach CRI > 85. The re‐premeditated LED packages are useful for high‐definition lighting.