Corrosion Inhibition of Carbon Steel Immersed in Standardized Reconstituted Geothermal Water and Individually Treated with Four New Biosourced Oxazoline Molecules

Abstract

The current demand for heat production via geothermal energy is increasingly rising amid concerns surrounding non-renewable forms of energy. The Dogger aquifer in the Paris Basin (DAPB) in France produces saline geothermal waters (GWs), which are as hot as 70–85 °C, anaerobic, slightly acidic (pH 6.1–6.4), and characterized mainly by the presence of Cl−, SO42−, CO2/HCO3−, and H2S/HS−. These GWs are corrosive, and the casings of all geothermal wells are carbon steel. Since 1989, these GWs have been progressively treated using petrosourced organic corrosion inhibitors (PS–OCI) at the bottom of the production wells. Currently, there is a great need to test not only new PS–OCIs but also, and above all, biosourced organic corrosion inhibitors (BS–OCIs) to improve the efficiency and environmental friendliness of this carbon-free geothermal energy source. The main objective of this study is to evaluate the potential performance of biosourced corrosion inhibitor candidates (BS–CICs) in terms of their inhibition efficiency (IE) for carbon steel corrosion. This was achieved using a previously established geochemical and electrochemical method to study the mechanisms and kinetics of the corrosion/scaling of carbon steel and optimize short-term corrosion inhibition in standardized reconstituted geothermal water (SRGW) representative of the DAPB’s waters. Four new molecules from the 2-oxazoline family were evaluated individually and compared based on their behavior and inhibition efficiency. These molecules exhibited a mixed nature (i.e., anodic and cathodic inhibitors), with a slight anodic predominance, and showed a significant IE at a concentration of at 10 mg/L during the first hours of immersion of CS-XC38 in SRGW. The average IEs, obtained via the three electrochemical techniques used for the determination of corrosion current densities, i.e., Jcorr(Rp), Jcorr(Tafel), and Jcorr(Rw), are 51%, 79%, 96%, and 93% for Decenox (C10:1), Decanox (C10:0), Undecanox (C11:0), and Tridecanox (C13:0), respectively.