Corrosion resistance of 6061-T6 aluminium alloy and its feasibility of near-surface reinforcements in concrete structure

Abstract

The durability of concrete structures is often reduced owing to the corrosion of reinforcement in an aggressive environment. Ordinary reinforcement methods, such as wrapping section steel or steel plate, are also vulnerable to corrosion. Using 6061-T6 aluminium alloy as near-surface reinforcement of the concrete structure is a feasible method. In this study, the corrosion resistance of 6061-T6 aluminium alloy bars was studied by simulating the coastal environment, atmospheric environment, and concrete internal environment with chloride solution, simulated acid rain solution, and saturated Ca(OH)2 solution. The corrosion rate of the 6061-T6 aluminium alloy in the above environments was tested using a weight loss method, and its corrosion resistance was evaluated using the metal corrosion resistance classification standard. Based on the electrochemical reaction mechanism, the polarisation properties and AC impedance spectra of steel and 6061-T6 aluminium alloy were compared, and the corrosion resistance mechanisms of steel and the 6061-T6 aluminium alloy in the above corrosive environments were obtained. The results show that the 6061-T6 aluminium alloy has better corrosion resistance than steel bars in chloride and atmospheric environments, with corrosion currents of 0.012 and 0.037 µA·cm−2, and 8-day corrosion rates of 0.051 and 0.031 mm·a−1, respectively. However, owing to the activity of the aluminium alloy, its corrosion resistance in an alkaline environment inside concrete is poor; the corrosion current is 0.22 µA·cm−2 and the 8-day corrosion rate is 16.166 mm·a−1. The research results can provide a reference for applying aluminium alloy bars as external prestressed concrete bars and near-surface steel bars.

Fracture Behaviour of Aluminium Alloys under Coastal Environmental Conditions: A Review

“…Humid conditions can significantly influence the material properties of aluminium alloys, often increasing the challenges posed by the marine atmosphere. Daming et al [98] studied the corrosion resistance of aluminium alloy under high humidity conditions. High humidity levels prevalent in coastal areas enhance moisture absorption by aluminium alloys.…”

A Review on Traditional Processes and Laser Powder Bed Fusion of Aluminum Alloy Microstructures, Mechanical Properties, Costs, and Applications

“…This material is widely used in shipbuilding, automotive, aviation, construction, packaging, and other fields, such as the body of Boeing 747 and Airbus A320, engine covers and doors of BMW and Audi cars, etc. The 6XXX aluminum alloy [ 38 , 39 , 40 ] is an aluminum–magnesium–silicon alloy, with magnesium, silicon, manganese, and other elements as its main components. It combines the advantages of 4XXX and 5XXX aluminum alloys, with high strength, good corrosion resistance, and ductility, and is widely used in automotive, aviation, construction, sports equipment, and other fields.…”

Study on Bond Performance between Corroded Deformed Steel Bar and DS-ECC

“…When a reinforced concrete structure is subjected to a complex external environment, its internal steel bars are susceptible to corrosion failure [11]. The corrosion of steel bars reduces the effective cross-sectional area of steel bars [12,13], the tensile strength and ductility of steel bars [14][15][16] and the bond strength between steel bars and concrete [17,18], limiting the load-bearing capacity and durability of reinforced concrete structures [19][20][21][22]. To ensure the safety and service life of the structure, the use of ECC to reinforce steel bar concrete structures with bonding properties between the two is critical, ensuring the success of the steel bars.…”