Crack growth simulation in 13th row of compressor blades under foreign object damage and resonant vibration condition

Abstract

In this study, the cracks growth rate in the 13th row of the T56 compressor blades was studied to investigate their fatigue life. For this purpose, the centrifugal and aerodynamic forces on the blade were calculated and then the resulting stress field was obtained by using finite element method. Then, the critical points of stress were determined and the initial semi-elliptical cracks were modeled at these points. After modeling of the initial crack, the stress intensity factor on the crack front was calculated by ANSYS software. Furthermore, the number of required cycles for the crack growth and blade fracture were calculated by applying Paris law to a certain value. After crack growth at this stage, a crack with new length was also modeled at the same point and all the mentioned stages for its growth, were repeated. In this paper, the modal analysis of the blade was conducted and normal frequencies with possible stimulation on compressor velocity were determined by Campbell Diagram. After determining the stress field at resonant frequency, all stages of crack growth were repeated under these conditions to calculate the fatigue life.

An Analysis on Improvement of X-Ray Diffractometer Results by Controlling and Calibration of Parameters

“…On the one hand, conducting numerical analysis requires statistical analysis [11][12][13][14][15] and experimental design, susceptible to errors and barriers such as uncertainty [16]. On the other hand, every experimental work needs a good calibration and inspection [17][18][19][20].…”

Analyzing the Explosive Behavior of a Buckling Restrained Brace Frame Made of Shape Memory Alloy by Using Finite Element Method

“…Despite the higher impact resilience of isotropic materials like steel alloys, composite materials demonstrate superior strength when subjected to tension or compression loading. Notably, concrete, while categorized as a brittle material, displays heightened resistance to buckling when contrasted with various other composite materials, such as bone [1][2]. A continuous concrete jacket surrounds the steel core to prevent its buckling under compressive forces.…”