Data-Driven Predictive Control With Switched Subspace Matrices for an SCR System

Abstract

Selective catalytic reduction (SCR) systems are distributed systems with strong timevarying parameter characteristics such that an accurate model for it is difficult to establish. Its control task simultaneously achieving high NO x conversion efficiency and low 3 NH slip is a typical multi-objective and multi-constraint problem, which is suitable to be solved in the framework of the model predictive control (MPC). However, how to find a data-driven identification method based on the dynamic characteristics of an SCR system and a corresponding MPC method for satisfying its emission requirements remain a formidable challenge. The sufficient identification for the traditional identification method with fixed subspace model requires an excessively high order subspace matrix, such that a degradation in real-time performance is caused and the generality of the method under non-identification conditions is limited. In this paper, utilizing the transient data of the SCR system under the WHTC cycle, a novel identification method for some lower order subspace matrices excited by the segmented data referring to the dynamic of the ammonia coverage ratio is established. A corresponding predictive controller with the switched subspace matrices according to working conditions is designed in order to further improve its real-time performance, generality and robustness. The simulation results show that under the identification condition the proposed predictive controller compared to the traditional method can improve the emissions of NO x and 3 NH , that under the non-identification condition the proposed predictive controller can also improve the emissions and its optimization effects have better robustness to uncertainties of the transient cycle, and that the proposed predictive controller saves an significant computation time.