Deactivation of metastable single-crystal silicon hyperdoped with sulfur

Abstract

Silicon supersaturated with sulfur by ion implantation and pulsed laser melting exhibits broadband optical absorption of photons with energies less than silicon's band gap. However, this metastable, hyperdoped material loses its ability to absorb sub-band gap light after subsequent thermal treatment. We explore this deactivation process through optical absorption and electronic transport measurements of sulfur-hyperdoped silicon subject to anneals at a range of durations and temperatures. The deactivation process is well described by the Johnson-Mehl-AvramiKolmogorov framework for the diffusion-mediated transformation of a metastable supersaturated solid solution, and we find that this transformation is characterized by an apparent activation energy of E A ¼ 1:7 6 0:1 eV. Using this activation energy, the evolution of the optical and electronic properties for all anneal duration-temperature combinations collapse onto distinct curves as a function of the extent of reaction. We provide a mechanistic interpretation of this deactivation based on short-range thermally activated atomic movements of the dopants to form sulfur complexes. V C 2013 AIP Publishing LLC. [http://dx

Simultaneous high crystallinity and sub-bandgap optical absorptance in hyperdoped black silicon using nanosecond laser annealing

“…The deactivation of sub-bandgap optical absorptance, which is associated with an increase in electron mobility and changes in sheet carrier concentration, has been explained using the Johnson-Mehl-AvramiKolmogorov framework describing diffusion-mediated changes in metastable supersaturated solid solutions such as hyperdoped silicon. 31 However, the reactivation of the sub-bandgap optical absorptance after heating and fast cooling suggests that the degree of departure from room-temperature equilibrium of the dopant atoms, as reflected by the placement of the dopant atoms within the lattice, is reversible and important in describing the properties of hyperdoped silicon, similarly to the way in which fictive temperature is important in describing the properties of glasses -another non-equilibrium material. Reactivation has been previously reported when deactivated hyperdoped silicon was irradiated with fs laser pulses or heated to temperatures above 1350 K followed by fast cooling (e.g., in silicone oil, yielding estimated cooling rates of about 250 K/s).…”

Room-temperature operation of a titanium supersaturated silicon-based infrared photodetector

“…Some groups have thoroughly investigated Si supersaturated with S or Se prepared by laser irradiation in SF 6 atmosphere or by ion implantation and subsequently pulsed laser melted (PLM). [8][9][10][11][12] An extended infrared photoresponse with high gain levels has been shown. 13,14 In previous works, we have deeply investigated Si supersaturated with Ti 15 or V, 16 and we reported the first solar cell device based on Ti supersaturated Si.…”

Realizing the insulator-to-metal transition in Se-hyperdoped Si via non-equilibrium material processing

“…Both pulsed laser annealing in the nanosecond range [8,14] and furnace annealing in the minute one [15,16] have been used to activate S and Se dopants in Si introduced by ion implantation. However, the long-time process required for furnace annealing or even few seconds for rapid thermal annealing will cause large possibilities for impurity diffusion, resulting in a low substitutional fraction [15] or a deactivation of dopants [17]. During pulsed laser annealing the surface temperature exceeds the melting point, subsequently leading to liquid-phase epitaxial regrowth.…”