Decreasing the stick-slip vibration during drilling wells using water and polymer drilling mud modified with NanoSiO2 particles

Khalil, Abdulkareem A.; Adnan, M. Sadeq; Asad, Maaly S.; Alfarge, Dheiaa

doi:10.1016/j.kjs.2024.100178

Cited by 1 publication

(1 citation statement)

References 20 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Horizontal well technology is a key technology in drilling and completion engineering, which has great advantages in improving single well production and economic benefits, and has gradually become the main development direction in the field of oil and gas development. , When horizontal wells are drilled to the middle and late stages, the solid-phase content in drilling fluid gradually increases, causing an increase in the thickness and a decline in the lubricity of wellbore mud cake resulting in a significant increase in horizontal friction, which is prone to problems such as sticking. − Also, the increase in thickness of wellbore mud cake highlights the phenomenon of weak cementing interfaces, leading to a decrease in cementing strength at the second interface, seriously affecting the sealing performance of the wellbore and, more seriously, can cause oil and gas channeling, threatening the lifespan and environmental safety of oil and gas wells. − Therefore, the problems of increased friction and poor cementing quality caused by the decline in lubricity and the increase in thickness of mud cake have seriously restricted the development of horizontal well technology, which cannot be ignored in the application of horizontal well technology …”

Section: Introductionmentioning

confidence: 99%

Mud Cake Improver Mul-GX with Lubrication and Interface Enhancement Effect and Its Action Mechanism

Zhang,

Liang,

Feng

et al. 2024

ACS Omega

View full text Add to dashboard Cite

In view of the problems in which the solid content of drilling fluid increases in the middle and late stages of horizontal well drilling, the lubricity of mud cakes on the borehole wall decreases, and the friction of pipe string increases due to the gradual thickening of mud cakes, which leads to the sticking and the obvious decrease of cementing strength at the second interface, a mud cake improver Mul-GX with lubrication and interface enhancement effect was studied in this paper. Based on the hydration and filling mechanism, the lubricity of the mud cake was improved, its thickness was reduced, and its strength was improved through synergistic effects of solvated water film lubrication and buffering, hardening and crystallization of gelled substances, and filling and dispersion of elastic particles. The mud cake improver Mul-GX is composed of the metasilicate GX-ZQ, polymer copolymer GX-JB, and polymer GX-TX, and the mass ratio of each component was GX-ZQ: GX-JB: GX-TX = 15:1:0.5. The effect of Mul-GX was evaluated through the performance determination of the mud cake and interface cementing simulation experiments. In addition, the microscopic characterization by SEM and XRD were carried out to analyze the mechanism of Mul-GX. The experimental results showed that when Mul-GX was added to the water-based drilling fluid with the 1.0%−1.5% adding quantity, the mud cake lubricity improved by more than 60%, its thickness reduced by 53.9% on average, and its strength increased by 54.3% on average. At the same adding quantity, the interfacial bonding strength was 4.4 times more than the data before adding Mul-GX. All of the results showed that Mul-GX has obvious mud cake lubrication effect and interface enhancement effect.

show abstract