Degumming of Hemp Fibers Using Combined Microwave Energy and Deep Eutectic Solvent Treatment

Abstract

Hemp bast fibers were degummed using combined microwave energy (MWE) and deep eutectic solvent (DES) to generate pure hemp cellulose fibers for potential textile applications. The properties of the obtained fibers were investigated and compared with those from the traditional alkali-based process using several analytical techniques. Results revealed that hemp fiber surface underwent dramatic structural disruption during the pretreatment, due to the removal of “gummy” compounds (i.e., lignin, pectin, oil, and wax) and amorphous cellulose. Ultraviolet (UV) protection factor (UPF) of DES-treated fibers with 1:20 fiber-DES ratio (i.e., 183.67) were significantly higher than those from the traditional alkali-treated (140.75) and untreated raw hemp fibers (127.47). The treated fibers also had higher thermal stability. Chemical composition analysis showed that the cellulose content in the treated fiber samples increased to 49.95% which was comparable with the cellulose content of the alkali-treated fibers (49.49%). The study demonstrates a potentially effective, less time-consuming, and environmentally sustainable protocol for manufacturing purified hemp cellulose fibers using combined MWE-DES treatment.