Demolding Moment Calculation for Injected Parts with Internal Trapezoidal Thread

Abstract

At the final step of the injection process (of a plastic product with cavities) when the part is on the point to be ejected the adhesion phenomena occurs between the core and the plastic part. The mold adhesion effect has a significant influence on the mold design ejection system and over the whole process. This paper presents a computation methodology of the demolding moment for two cases of plastic injected parts with internal trapezoidal thread. Knowing the value of this moment offer us the possibility to adopt the right design solution of the ejector system and of the entire mold. As further work the author will try to validate this method through a set of practical experiments.

Design and Process Analysis of Single Cavity Injection Molding Die for Plastic Wing Nut

“…Inserts with thread profile is located at desired positions prior to injection. After injection, as usual plastic contracts on threaded profile but removal of these threaded inserts is easy and does not cause any damage to the thread profile of [11]. This article aims at checking feasibility of injection molding of wing nut, a small mechanical element with internal thread.…”

Development of an Android Application for COVID-19 using Firebase and Geo-fencing

“…Inserts with thread profile is located at desired positions prior to injection. After injection, as usual plastic contracts on threaded profile but removal of these threaded inserts is easy and does not cause any damage to the thread profile of [11]. This article aims at checking feasibility of injection molding of wing nut, a small mechanical element with internal thread.…”