Depth profiling of the microwave surface resistance of high-J_CGdBa₂Cu₃O_7−δcoated conductors grown using the RCE-DR process

Abstract

We study depth profiling of the microwave surface resistance (RS) of GdBa2Cu3O7−δ (GdBCO) coated conductors (CCs) grown using the reactive co-evaporation by deposition and reaction (RCE-DR) method, a method enabling extremely high deposition rate. GdBCO CCs with the critical current (IC) of more than 790 A cm−1 at 77 K in self-field are used for the study. The RS of the GdBCO CCs is measured at temperatures of 10–80 K using a 8.5 GHz TE011-mode rutile resonator, which is compared with that of YBa2Cu3O7−δ films and GdBCO films epitaxially grown on single crystal substrates. It turns out that there is significant inhomogeneity in the RS over the thickness of the GdBCO layer, with the RS value of the top part at 30 K being almost two times higher than the corresponding one of the bottom part. A transmission electron microscopy study reveals that Gd2O3 grains coexist with GdBCO grains with the average Gd2O3 grain sizes being ∼150 nm at the top and ∼100 nm at the bottom of the GdBCO layer. We relate the inhomogeneity in the RS of the GdBCO layer with the positional dependence of the Gd2O3 grain size, for which effects of the dielectric losses from the Gd2O3 grains on the measured RS of the GdBCO layer are considered. Our results imply that the critical current density, another important transport property of superconductors, could be inhomogeneous over the thickness of the GdBCO layer grown using the RCE-DR method.

Multi-Aperture Shower Design for the Improvement of the Transverse Uniformity of MOCVD-Derived GdYBCO Films

“…At present, there are several main process methods to prepare REBCO films, such as pulsed laser deposition (PLD) [8,9], metal organic deposition (MOD) [10,11], sputtering [12], co-evaporation [13,14], and metal organic chemical vapor deposition (MOCVD) [15,16,17,18]. The PLD technology is a very mature method to prepare high-quality films [9,19].…”

“…The co-evaporation method can be also used to prepare REBCO films and its advantages include a high deposition rate and good process repeatability. Its disadvantage is high equipment requirements [13]. Because the MOCVD method has the advantages of low vacuum requirement, easy composition adjustment, and high production efficiency [18,20], a home-made MOCVD system was used to prepare GdYBCO HTS films by us.…”