Design and Additive Manufacturing of Porous Sound Absorbers—A Machine-Learning Approach

Abstract

Additive manufacturing (AM), widely known as 3D-printing, builds parts by adding material in a layer-by-layer process. This tool-less procedure enables the manufacturing of porous sound absorbers with defined geometric features, however, the connection of the acoustic behavior and the material’s micro-scale structure is only known for special cases. To bridge this gap, the work presented here employs machine-learning techniques that compute acoustic material parameters (Biot parameters) from the material’s micro-scale geometry. For this purpose, a set of test specimens is used that have been developed in earlier studies. The test specimens resemble generic absorbers by a regular lattice structure based on a bar design and allow a variety of parameter variations, such as bar width, or bar height. A set of 50 test specimens is manufactured by material extrusion (MEX) with a nozzle diameter of 0.2 and a targeted under extrusion to represent finer structures. For the training of the machine learning models, the Biot parameters are inversely identified from the manufactured specimen. Therefore, laboratory measurements of the flow resistivity and absorption coefficient are used. The resulting data is used for training two different machine learning models, an artificial neural network and a k-nearest neighbor approach. It can be shown that both models are able to predict the Biot parameters from the specimen’s micro-scale with reasonable accuracy. Moreover, the detour via the Biot parameters allows the application of the process for application cases that lie beyond the scope of the initial database, for example, the material behavior for other sound fields or frequency ranges can be predicted. This makes the process particularly useful for material design and takes a step forward in the direction of tailoring materials specific to their application.

An Overview of AI-Assisted Design-on-Simulation Technology for Reliability Life Prediction of Advanced Packaging

“…In recent years, AI theory has been widely used in various research domains. Machine learning involves the use of AI theory combined with big data to guide computers for training and learning; eventually, a simple AI model with input and output relationships will be developed to help researchers make design decisions [ 21 , 22 , 23 , 24 ]. Machine learning [ 25 , 26 , 27 , 28 ] can be applied for regression or classification models using either supervised or unsupervised learning.…”

A bibliometric analysis of research in design for additive manufacturing

“…However, most recent studies have focussed on how to exploit the material capabilities in the use of AM technologies. Li et al (2021) studied the material growth pattern using a force flow technique, Kuschmitz et al (2021) utilised a machine learning approach to compute acoustic material parameters (Biot parameters) from the material’s micro-scale geometry and the application of multi-material capabilities of AM to the development of elastomers and electrically conductive polymers (Watschke et al , 2021). Future work should focus on how to control anisotropy through process planning to achieve dual control of material geometry and performance.…”

Imaging by Unsupervised Feature Learning of the Wave Equation

“…Research in different areas of physics, spanning from classical [1,2] to quantum physics [3,4], has witnessed rapid adoption of machine-learning (ML) techniques to study complex systems with the capability of analyzing a massive amount of data or knowledge discovery [5,6]. Due to the highly generic nature of constructing physical models with minimal expert knowledge required in specific applications, ML techniques have been extended to studying wave phenomena in photonics and acoustics [7][8][9][10][11][12][13]. For "forward" problems, researchers are interested in using a deep-learning convolutional neural network as a surrogate solver to replace full-wave simulations for faster computation [14,15].…”