Design and Analysis of a Compact Dual-Band Patch Antenna for 5G mmW Application

Ullah, Kifayat; Ullah, Shakir; Din, Iftikhar Ud; Mahboob, Tariq; Mashal, Abdur Rehman; Ullah, Sadiq; Habib, Usman

doi:10.1109/icosst51357.2020.9333070

Cited by 8 publications

(3 citation statements)

References 10 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…al presented two MIMO twoelement array antenna designs from a single element of dimensions 4.4mm x 4.1 mm and height of 0.635 mm of RT/ Duroid 6010LM (𝜀 𝑟 = 10.7) to operate in 28 GHz and 38 GHz bands only. In [5], Kifayat Ullah and et al presented a single element defected ground structure patch antenna with dimensions 8x8 mm 2 and height 0.8 mm of Rogers Ro4350 (𝜀 𝑟 = 3.66) operating in both 28GHz and 42 GHz with peak gain 6.2 dBi and efficiency above 96%. In In [11], Naser and et al presented a 1x8 phased array antenna with dimensions 75 x 150 mm 2 and height 0.5 mm of Rogers RT5880 covering all bands from 26 GHz to 43 GHz with gain more than 10 dBi and total efficiency more than 70%.…”

Section: Related Workmentioning

confidence: 99%

Two-Element Pharaonic Ankh-Key Array Antenna Design, Simulation, and Fabrication for 5G and Millimeter-Wave Broadband Applications

2022

View full text Add to dashboard Cite

In this paper, a two-element Pharaonic Ankh-Key array antenna is proposed. The array antenna is designed, simulated and fabricated to enhance the new technologies upcoming in the market. The multiband array antenna can operate in 24 GHz band, 28 GHz band, 37 GHz band, 39 GHz band, 47 GHz band, E-band, W-band, and D-band with peak gain between 7.8 dBi to 12.3 dBi along the resonating spectrum. The array antenna is a single layer two-element antenna separately fed by 50Ω microstrip line with dimensions 18.7 mm x 18.5 mm and a height of 0.787mm Rogers/Duroid RT 5880 of 𝜀 𝑟 = 2.2 and tanδ = 0.0009 which was easily fabricated with a very low cost comparing to the existing antennas in the market making it a very promising candidate for 5G and beyond technologies MIMO applications as it operates in almost all band between 23 GHz and 140 GHz. The antenna is designed and simulated using CST Suite, Ansys HFSS, and IE3D Mentor Graphics simulators then the simulated results where compared to the measured results achieving a very good agreement.

show abstract

Section: Related Workmentioning

confidence: 99%

Two-Element Pharaonic Ankh-Key Array Antenna Design, Simulation, and Fabrication for 5G and Millimeter-Wave Broadband Applications

2022

View full text Add to dashboard Cite

show abstract

“…Despite of low gain, compared to the forementioned designs, the substrate thickness and dielectric constant are obviously greater [12] . In [13] , an interesting dual-band compact patch has been presented, the antenna operates at 28.2 GHz and 42 GHz. The result of return loss and VSWR graphs shows that the lower band has 2 GHz of BW and the upper band has 9.2 GHz of BW.…”

Section: Literature Reviewmentioning

confidence: 99%

“…V band frequency ranges start from 40 GHz to 75 GHz of millimeter wave band (3 GHz to 300 GHz) [8] . In parallel with the allocation of 45.5-47 GHz, 47.2-48.2 and 66-71 GHz bands for 5G deployments in World Recommendation Conference ( WRC-19) International Telecommunication Union (ITU) [9] , recent trends show numerous researches in proposing high-performance microstrip patch antenna in V band frequencies and other bands of millimeter waves for 5G communication systems and other applications [3][4][5][6][7], [10][11][12][13][14] . The foucses of many researches are to optimize the antenna to deliver optimum performance, this is some how achived by serveral modifications of antennas' shape, while the geomerty of the shape is getting very complicated and impractical for fabrication and manufacturing.…”

Section: Introductionmentioning

confidence: 99%

Design and Simulation of Rectangular Microstrip Patch Antennas (45 GHz and 60 GHz) for V-band Applications

Saeed

2022

PJBAS

View full text Add to dashboard Cite

In this article, two wideband microstrip rectangular patch antennas have been designed and simulated for V band communication systems at resonant frequencies 45 GHz and 60 GHz. Rogers RO4730G3 is used as a substrate dielectric with dielectric constant 2.98. The dimensions of the antennas are 6.23mm*6.7mm*0.7mm and 6mm*6.4mm*0.7mm respectively, with very simple geometrical configuration. To investigate the performance, the designs were then simulated using (CST) Studio Suite software package. The dimensions have been well studied and optimized to obtain acceptable results of Voltage Standing Wave Ration (VSWR), return loss, gain, bandwidth (BW) and radiation pattern. The 45 GHz antenna provides a gain of 6.73 dBi with the BW of 5.5 GHz and 1.03 of VSWR. Meanwhile, the 60 GHz design offers 6.92 dBi of gain with BW of 11.57 GHz and 1.05 of VSWR. The achieved results illustrate that both designs provide a good performance and are applicable for future 5G communication systems or any applications in the V band region.

show abstract

Performance analysis of 6G terahertz antenna design using micro strip patch feed

Mothesvar,

Nandalal

2024

Fifth International Conference on Applied Sciences: Icas2023

View full text Add to dashboard Cite

Design and Analysis of a Compact Dual-Band Patch Antenna for 5G mmW Application

Cited by 8 publications

References 10 publications

Two-Element Pharaonic Ankh-Key Array Antenna Design, Simulation, and Fabrication for 5G and Millimeter-Wave Broadband Applications

Two-Element Pharaonic Ankh-Key Array Antenna Design, Simulation, and Fabrication for 5G and Millimeter-Wave Broadband Applications

Design and Simulation of Rectangular Microstrip Patch Antennas (45 GHz and 60 GHz) for V-band Applications

Performance analysis of 6G terahertz antenna design using micro strip patch feed

Contact Info

Product

Resources

About