2004 IEEE MTT-S International Microwave Symposium Digest (IEEE Cat. No.04CH37535)
DOI: 10.1109/mwsym.2004.1338806
|View full text |Cite
|
Sign up to set email alerts
|

Design and analysis of UWB band pass filter with ring filter

Help me understand this report

Search citation statements

Order By: Relevance

Paper Sections

Select...
3
1

Citation Types

1
136
2

Publication Types

Select...
8
1
1

Relationship

0
10

Authors

Journals

citations
Cited by 175 publications
(139 citation statements)
references
References 1 publication
1
136
2
Order By: Relevance
“…In his apparatus, the powder is uniaxially pressed between two ceramic punches while the current is alternately applied to a group of electrode pairs located around the die surface. An improvement was proposed by Ishida et al [110] who used nonconductive punches to achieve much larger pressures. An alternative method was proposed by Tokita and Miyake [111], so-called Super high-speed temperature rise sintering in which the currents are driven by the electrodes surrounding the die (figure 17) and the pressure is exerted by the upper and lower punches which also act as electrodes.…”
Section: Application Of Current From Die Side Facesmentioning
confidence: 99%
“…In his apparatus, the powder is uniaxially pressed between two ceramic punches while the current is alternately applied to a group of electrode pairs located around the die surface. An improvement was proposed by Ishida et al [110] who used nonconductive punches to achieve much larger pressures. An alternative method was proposed by Tokita and Miyake [111], so-called Super high-speed temperature rise sintering in which the currents are driven by the electrodes surrounding the die (figure 17) and the pressure is exerted by the upper and lower punches which also act as electrodes.…”
Section: Application Of Current From Die Side Facesmentioning
confidence: 99%
“…As one of many such research activities, the design methods of bandpass filters have been reported [1][2][3]. Ishida and Araki [1] designed the UWB bandpass filter whose bandwidth is formed by adding notches in the sections of the transmission line. So, it shows very narrow stopband.…”
Section: Introductionmentioning
confidence: 99%
“…As one of many such research activities, the design methods of bandpass filters have been reported [6][7][8][9][10]. Araki et al [6] designed the UWB bandpass filter whose bandwidth is formed by adding zeros in the sections of the transmission line. The frequency response has notches at the specific points as the very narrow regions for out-of-band suppression.…”
Section: Introductionmentioning
confidence: 99%