Design and Application of a Rock Porosity Measurement Apparatus under High Isostatic Pressure

Abstract

Rock porosity is a key physical parameter at room temperature and pressure that plays an important role in evaluating reserves of oil and natural gas. Research on rock porosity spans over a hundred years. However, in situ porosity under a high isostatic pressure has not been adequately explored, and the experimental conditions for measuring porosity remain unclear. To investigate the feasibility of porosity measurement under a high isostatic pressure and the optimal choice of experimental conditions for this, we design an experimental apparatus that can achieve isostatic pressure up to 200 MPa to fit the relationship between the void volume of a given sample and the drop in gas pressure in an empty standard chamber. The effect of experimental parameters, such as the initial gas pressure at the inlet, the time needed for the gas to reach equilibrium, and the time needed for vacuuming, on the porosity experiment was examined. A series of porosity experiments under different isostatic pressures of up to 200 MPa were carried out with this apparatus. The results quantitatively verify the degree to which porosity is related to isostatic pressure.

Three-Dimensional Printing of Synthetic Core Plugs as an Alternative to Natural Core Plugs: Experimental and Numerical Study

“…Figure 7 shows the digital porosity profile obtained via voxelization of the core plug and the 3D-printed sample used to find the porosity of case study 4 . Details of the helium porosimeter porosity measurement procedure can be found in Reference [30,31]. The digital porosity results and the experimental helium porosity results are shown in the next section.…”