Design and Implementation of a Wireless Patient Health Monitoring System

Manzombi, O.; Dogo, Eustace M.; Nwulu, Nnamdi

doi:10.1109/idap.2019.8875986

Cited by 3 publications

(3 citation statements)

References 4 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Even in [10], a system works as a rain gauge created; it consists of the detection unit with a sensor that works as a rain gauge. It consists of two parts, a funnel and a container that collects water.…”

Section: A Related Workmentioning

confidence: 99%

Rain Attenuation in 5G Wireless Broadband Backhaul Link and Develop (IoT) Rainfall Monitoring System

Zarkadas¹,

Dimitrakopoulos²

2021

IJACSA

View full text Add to dashboard Cite

Climate change is the cause of more frequent and intense rainfall where they affect wireless communications because they cause severe weakening of the power of the emitted signal. These losses reduce network coverage and, therefore, system availability. The proposed solution is to integrate an Internet of Things (IoT) rainfall monitoring system where it will be able to collect real-time data on the height of rain that erupts in a particular place. This data will help areas where base stations install and the distance of the link that may need to be changed to reduce rainfall's harmful effects. So, the prediction of attenuation due to rain is an essential parameter in both terrestrial and satellite connections. The present study uses the ITU-R P 838 and ITU-R P 530 models to theoretically calculate losses in a 5G wireless broadband link with 99.9% link availability. This study conducts three frequency bands, 24 GHz, 28 GHz, and 38GHz, in Palo Alto, California. The travel distance is 5km, while the rainfall rate for the analyzed area is in zone D. The results show that the attenuations are proportional to the frequency, polarization, and rainfall rate.

show abstract

Section: A Related Workmentioning

confidence: 99%

Rain Attenuation in 5G Wireless Broadband Backhaul Link and Develop (IoT) Rainfall Monitoring System

Zarkadas¹,

Dimitrakopoulos²

2021

IJACSA

View full text Add to dashboard Cite

show abstract

“…Advanced ideas are used in this system approach, which is a combination of all three including temperature detection, number of people, and mask detection [7]. Another research is a wireless temperature monitoring system of vital signs such as the patient's body and pulse in real time [8].…”

Section: Introductionmentioning

confidence: 99%

Design of room capacity measurement and body temperature detection based on atmega328 microcontroller

Azhari

Marbun

Karolina

et al. 2022

J. Phys.: Conf. Ser.

View full text Add to dashboard Cite

The outbreak of Corona Virus Disease 2019 (Covid 19) cases that occurred from 2020 until now limits the current maximum allowed room capacity, which is only around 25% to 50% of the maximum room capacity. The purpose of this study is to design a device that can detect temperature and limit room capacity automatically as an effort to prevent the transmission of the covid 19 virus. In designing a room capacity measuring device and an atmega328 microcontroller-based body temperature detector with a viewer on an android smartphone. The ultrasonic sensor HC-SR04 is used to measure the capacity of the room to determine the number of people entering and leaving. Then this tool also uses the MLX90614 sensor to detect the body temperature of everyone who wants to enter with the temperature conditions below 38°C. When both sensors have worked according to their functions, the doorstop can be opened. The results of the data obtained on each sensor will be sent to the microcontroller as a control center on a system so that it can be displayed on the LCD and using an additional device, namely esp8266 as a wifi communication module. After testing it can be concluded that the tool works well. The comparison of the results of the MLX90614 sensor with a standard tool. The data obtained is quite accurate with maximum error only 2.2% with the comparison tool.

show abstract

“…However, it is not accompanied by the detected respiratory rate values , so that the accuracy of the sensors used cannot be known [17]. In the "Design and Implementation of a Wireless Patient Health Monitoring System" study by Manzombi et al, regarding monitoring the heart rate of patients in hospitals using a 433MHz transmitter and receiver radio frequency communication system has the advantage of being able to transmit in real-time, but in this study only can monitor the patient's heart rate [18]. Next is the implementation of a wireless sensor network for medical applications, which has been carried out by Hayder J Hassaballah and Rashid A Fayadh on a method of monitoring heart rate and SPO2 using HC-12 with the aim of being able to easily transmit with a distance of tens of meters in a monitoring system in hospital but this method is still used only for monitoring SPO2 values and heart rate [19].…”

Section: Introductionmentioning

confidence: 99%

Design a Monitoring Device for Heart-Attack Early Detection Based on Respiration Rate and Body Temperature Parameters

Zahra

Wisana²,

Nugraha³

et al. 2021

Indones.J.electronic.electromed.med.inf

View full text Add to dashboard Cite

Acute myocardial infarction, commonly referred to as a heart attack, is the most common cause of sudden death where a monitoring tool is needed that is equipped with a system that can notify doctors to take immediate action. The purpose of this study was to design a heart attack detection device through indicators of vital human signs. The contribution of this research is that the system works in real-time, has more parameters, uses wireless, and is equipped with a system to detect indications of a heart attack. In order for wireless monitoring to be carried out in real-time and supported by a detection system, this design uses a radio frequency module as data transmission and uses a warning system that is used for detection. Respiration rate was measured using the piezoelectric sensor, and body temperature was measured using the DS18B20 temperature sensor. Processing of sensor data is done with ESP32, which is displayed wirelessly by the HC-12 module on the PC. If an indication of a heart attack is detected in the parameter value, the tool will activate a notification on the PC. In every indication of a heart attack, it was found that this design can provide notification properly. The results showed that the largest respiratory error value was 4%, and the largest body temperature error value was 0.55%. The results of this study can be implemented in patients who have been diagnosed with heart attack disease so that it can facilitate monitoring the patient's condition.

show abstract

Design and Implementation of a Wireless Patient Health Monitoring System

Cited by 3 publications

References 4 publications

Rain Attenuation in 5G Wireless Broadband Backhaul Link and Develop (IoT) Rainfall Monitoring System

Rain Attenuation in 5G Wireless Broadband Backhaul Link and Develop (IoT) Rainfall Monitoring System

Design of room capacity measurement and body temperature detection based on atmega328 microcontroller

Design a Monitoring Device for Heart-Attack Early Detection Based on Respiration Rate and Body Temperature Parameters

Contact Info

Product

Resources

About