Design and Implementation of Low Noise Amplifier Operating at 868 MHz for Duty Cycled Wake-Up Receiver Front-End

Abstract

The integration of wireless communication, e.g., in real- or quasi-real-time applications, is related to many challenges such as energy consumption, communication range, quality of service, and reliability. The improvement of wireless sensor networks (WSN) performance starts by enhancing the capabilities of each sensor node. To minimize latencies without increasing energy consumption, wake-up receiver (WuRx) nodes have been introduced in recent works since they can be always-on or power-gated with short latencies by a power consumption in the range of some microwatts. Compared to standard receiver technologies, they are usually characterized by drawbacks in terms of sensitivity. To overcome the limitation of the sensitivity of WuRxs, a design of a low noise amplifier (LNA) with several design specifications is required. The challenging task of the LNA design is to provide equitable trade-off performances such as gain, power consumption, the noise figure, stability, linearity, and impedance matching. The design of fast settling LNA for a duty-cycled WuRx front-end operating at a 868 MHz frequency band is investigated in this work. The paper details the trade-offs between design challenges and illustrates practical considerations for the simulation and implementation of a radio frequency (RF) circuit. The implemented LNA competes with many commercialized designs where it reaches single-stage 12 dB gain at a 1.8 V voltage supply and consumes only a 1.6 mA current. The obtained results could be made tunable by working with off-the-shelf components for different wake-up based application exigencies.

A Near-Optimal Energy Management Mechanism Considering QoS and Fairness Requirements in Tree Structure Wireless Sensor Networks

“…The sensor node has different operation modes, such as idle, sleep, listen, and transmit. Distance-based duty cycle assignment is based on the assumption that nodes closer to the sink must transmit a larger packet than those farther from the sink and is used to determine the duty cycle on the basis of the distance of a given node from the sink node [ 15 ]. Traffic-adaptive distance-based duty cycle assignment (TDDCA) is an improvement on traditional duty cycle–based methods and is based on the traffic patterns observed by the nodes [ 16 , 17 ].…”

Multi-objective optimization of CMOS low noise amplifier through nature-inspired swarm intelligence

“…The cascode topology with inductive source degeneration is the most widely used low-noise amplifier because it can simultaneously satisfy requirements for voltage gain and noise figure [29].…”

Energy-Sustainable IoT Connectivity: Vision, Technological Enablers, Challenges, and Future Directions

“…To optimize EC and responsiveness, it is important to minimize the wake-up time. This can be achieved by using low-power HW components, optimizing the SW for fast wake-up time, and selecting appropriate power management schemes [344].…”