Design and optimization of Cs₂SnI₆ based inorganic perovskite solar cell model: numerical simulation

Abstract

To overcome the drawbacks of high lead toxicity and poor corrosion resistance of lead-based perovskite solar cells (PSCs), and to compensate for the poor air stability of Sn2+ compound-based perovskite, Cs2SnI6 (Sn4+ compound) is selected as the absorber for the PSC in this study. Using FTO/ETL/Cs2SnI6/HTL/Au as the model, the high-performance non-toxic inorganic PSC structure is explored through theoretical simulation and calculation by SCAPS-1D. The conduction band offsets (CBO) and valence band offsets (VBO) of commonly used electron transport layer materials (ETMs), hole transport layer materials (HTMs), and Cs2SnI6 are calculated based on electron affinity potential (χ) and bandgap (Eg). Then, by analyzing the pn junction composed of ETL and HTL and the bandgap structure at the n-i, i-p interfaces, the most matching n-i-p planar heterojunction model, FTO/IGZO/Cs2SnI6/Cu2BaSnS4/Au, was selected. Finally, by analyzing and adjusting the material thickness, defect density of each layer, operation temperature, the optimal performance of PSC was determined to be 30.39% power conversion efficiency (PCE), 1.27 V open circuit voltage (Voc), 28.46 mA/cm2 short circuit current (Jsc), and 84.02% fill factor (FF). A new and more efficient PSC is proposed in this study, providing some terrific clues for finding high-quality alternatives to lead-based PSCs. The judgment method proposed in this study regarding the theoretical performance of PSCs can also provide some ideas for related experimental research.