Design and simulation of chalcogenide perovskite BaZr(S,Se)₃ compositions for photovoltaic applications

Abstract

Lead-free Perovskite materials have acquired a lot of interest owing to their potential to overcome the stability and toxicity concerns compared to traditional perovskite solar cells. Chalcogenide perovskites (ABX3, where A=Ba, B = Zr, X = S and/or Se) are emerging materials for photovoltaic (PV) applications. Computer-based designing of metal chalcogenide semiconductors, resulting in the identification of extremely appealing ABX3 substances and their derivatives that may be used as absorbers in thin-film PV devices. In this context, here the numerical studies are performed using the SCAPS-1D simulator for designing of chalcogenide perovskites-based solar cells. We used FTO (Fluorine-doped tin oxide), TiO2 aselectron transport layer (ETL),BaZrS3, and BaZrSe3 as an absorber layer, Spiro-OMeTAD as a hole transport layer (HTL), and Au as a metal back contact. The simulations are conducted under AM 1.5G solar spectrum designed to maximise the efficiency of the proposed solar cell. The selection of the optimal parameters such as thickness, defect density and temperature for all the layers including absorber, FTO, ETM, and HTM is examined. The parameters are considered, keeping in mind their impact on solar cell performance, budget effectiveness, and the physics of the entire solar cell architecture. The effect of temperatures between 300 K to 450 K is studied. The results indicate that the power conversion efficiency (PCE), FF (fill factor), Voc (Open Circuit Voltage) and Jsc for BaZrS3 is 12.12%, 79.40 %, 0.70V, 22.00 mA/cm2, respectively, whereas for BaZrSe3 it is 25.84%, 77.32 %, 0.72V, 46.65 mA/cm2, respectively. This shows that BaZrSe3 has the potential to replace BaZrS3.

Computational study of the structural, electronic, optical, and thermoelectric properties of (Ag, B, I) doped Cs2PdBr6 compound

“…The ABX 3 is composed of three types of atoms (A, B, and X): A is a monovalent cation, B is a divalent cation, and X is an anion. Examples of perovskite compounds include CH 3 NH 3 PbI 3 , CH 3 NH 3 SnI 3 , CsPbI 3 , CsPbBr 3 , RbTaO 3 , BaZrS 3 etc [8][9][10][11][12]. However, the presence of lead and tin in these compounds poses health risks, toxicity, and exhibits poor chemical stability in the air [13][14][15][16].…”