Design and simulation of video monitoring structure over TCP/IP system using MATLAB

Abstract

Video monitoring systems are undergoing an evolution from conventional analog to digital clarification to provide better rate and security over internet protocols. In addition, analog surveillance becomes insufficient to face enormous demand of security of system contains more than hundreds of camera often deployed in hotels environments far away from room control. This paper presents the design and simulation of a video monitoring scheme in excess of a transmission control protocol/internet protocol (TCP/IP) system using MATLAB. Sophisticated cameras could record directly high-definition digital videos based on digital technology which simply communicate the control room relaying on ordinary internet protocol infrastructure networks. This technology provides a flexible network interface over a wide variety of heterogeneous technology networks. Though, the acceptance of IP designed for video monitoring pretense severe difficulties in terms of power processing, system dependability, required bandwidth, and security of networks. The advantage of IP based video monitoring system has been investigated over conventional analog systems and the challenges of the method are described. The open research issues are still requiring a final solution to permits complete abandon against conventional technology of analog methods. In conclusion, the method to tackle the purpose of video monitoring in actual operation is proposed and verified properly by means of model simulation.

Determination of Packet Data Transmission Parameters when Working in the Meter Range

“…контроля канала путем оценки его пропускной способности (максимального объема передачи информации в единицу времени). Отметим, что для предварительной оценки параметров используются различные математические расчеты (математическая модель), правильность которых подтверждается при помощи практических измерений (реальной модели или прототипа) [8,9].…”