To improve the adaptability and precision of the slider-hole-wheel seed-metering device to meet the requirements of precision sowing, the single factor simulation experiments and the three factors three levels of orthogonal simulation experiments were carried out based on the discrete element method. The rotation speed of the seeding shaft, the shape of the hole, and the depth of the hole were set as experiment factors. The results of simulation experiments showed that the qualified rate was the highest when the rotation speed of the seeding shaft was 30 r/min, the shape of the hole was oval, and the depth of the hole was 9 mm. The qualified rate, replay rate, and miss-seeding rate were 89.09 %, 3.64 %, and 7.27 %,respectively. The hybrid rice seeds of Zhongnong 2008, Chuangliangyou 4418, and Gangyou 898 were chosen as the materials for the bench and field seeding performance tests to verify the reliability of the simulation results. The test results showed that the qualified rate of Zhongnong 2008, Chuangliangyou 4418, and Gangyou 898 seed in bench tests were 85.07 %, 85.20 %, and 82.13 %, and the qualified rate of Zhongnong 2008, Chuangliangyou 4418, and Gangyou 898 seed in field tests were 82.13 %, 82.27 %, and 80.53 %. The seeding performance with the three kinds of rice seeds could meet the agronomic requirements for precision sowing of hybrid rice. The paper provided the basis for the structure optimization and seeding performance improvement of the slider-hole-wheel seed-metering device.