Design Considerations for the Electrical Power Supply of Future Civil Aircraft with Active High-Lift Systems

Abstract

Active high-lift systems of future civil aircraft allow noise reduction and the use of shorter runways. Powering high-lift systems electrically have a strong impact on the design requirements for the electrical power supply of the aircraft. The active high-lift system of the reference aircraft design considered in this paper consists of a flexible leading-edge device together with a combination of boundary-layer suction and Coanda-jet blowing. Electrically driven compressors distributed along the aircraft wings provide the required mass flow of pressurized air. Their additional loads significantly increase the electric power demand during takeoff and landing, which is commonly provided by electric generators attached to the aircraft engines. The focus of the present study is a feasibility assessment of alternative electric power supply concepts to unburden or eliminate the generator coupled to the aircraft engine. For this purpose, two different concepts using either fuel cells or batteries are outlined and evaluated in terms of weight, efficiency, and technology availability. The most promising, but least developed alternative to the engine-powered electric generator is the usage of fuel cells. The advantages are high power density and short refueling time, compared to the battery storage concept.

Global Transportation Demand Development with Impacts on the Energy Demand and Greenhouse Gas Emissions in a Climate-Constrained World

“…For electric airplanes, there is a need to use batteries for power supply, which leads to an efficiency enhancement from 30% to 80% from turboprop engine to a full battery-electric system, according to Mueller et al [84]. They also investigate the efficiency increase of ICE to hydrogen-based FC and obtain a development from 30% to 41.7% overall efficiency.…”

“…The phase-in of all-electric flights is visualized in Figure 3, and based on the estimate of 11.7% of all p-km for flights up to 1.5 h and 23.4% of all p-km for flights within 1.5 and 3 h, whereas 80% of these flights should be served by all-electric flights in the longer term, which is projected to be achieved between 2050 and 2060. The assumed progress in aviation technology and respective implementation is based on today's understanding of technological options [84,90,91], first respective policies [52] and the enormous pressure to react on climate emergency [2,69,92,93], while economics may be attractive and first leading technology providers and airlines push the development to introduce all-electric flights by 2030 [94].…”

Future of Electrical Aircraft Energy Power Systems: An Architecture Review

“…Based on the current power required the estimated electrical power to properly operate an AEA narrowbody, such as the A320, would be around 20 MW [28]. It is worth noting that distributed propulsion is highly regarded in electrical aircraft to enhance the fuselage aerodynamics [43], [44] However, distributed propulsion negatively impacts power, weight and volumetric requirements for the electric system [45]. The evaluation of this kind of propulsion systems would require the use of Model Based Systems Engineering (MBSE) analysis [46], [47] to correctly identify the benefits in terms of weight at system level.…”

Discussion on Electric Power Supply Systems for All Electric Aircraft

“…For weight savings, novel fuselage and wing materials have to be considered. For the electrical systems, high efficiency electrical drives as well as high power density energy sources are needed [6]. Interconnecting the sources as well as the loads, which includes beside the motors additionally the Wing Ice Protection System (WIPS), the Environmental Control System (ECS), the control flaps, avionics, hotel and galley loads and more, requires a high efficiency energy distribution system.…”