Design, Construction and Evaluation of an Oscillating Vane Gust Generator for Atmospheric Flow Simulation

Abstract

The study of unsteady aerodynamic phenomena in wind tunnels is supported by gust-generating devices capable of generating adjustable magnitude and periodicity velocity fluctuations in a flowfield. Gusts are typically generated actively by introducing moving vanes to direct the flow, or passively by tailoring the boundary layer growth and shape in the tunnel. The flow facility used here is a student-built closed-return low-speed wind tunnel, with a test section size of 750 mm × 750 mm and a maximum speed of 25 m/s. A two-vane gust generator utilizing NACA0018 airfoil sections of 150 mm chord length was designed and installed upstream of the test section. The flowfield was mapped with the installed vanes with and without gust actuation, utilizing a hot wire system. The tunnel with gust vanes exhibits a spatially uniform baseline turbulence intensity of 5%, with a steady state velocity deficit of 1 m/s in the vane–wake region. Upon introducing the gusting conditions at vane deflection angles of up to ±45°, velocity differences of up to 4 m/s were attained at 18 m/s freestream velocity at oscillation frequencies ranging between 1 Hz and 2 Hz.

Development of a Novel Small-Scale Gust Generator Research Facility

“…OVM produces gusts by simulating vane oscillation using a dynamic grid method. French et al [5] used OVM to simulate gusts generated by a two-vane gust generator using the NACA0018 airfoil. Based on the simulation results, a two-vane gust generator is designed for use in a closedreturn low-speed wind tunnel.…”