Design, Control and Performance of RiceWrist: A Force Feedback Wrist Exoskeleton for Rehabilitation and Training

Abstract

This paper presents the design, control and performance of a high fidelity four degree-of-freedom wrist exoskeleton robot, RiceWrist, for training and rehabilitation. The RiceWrist is intended to provide kinesthetic feedback during the training of motor skills or rehabilitation of reaching movements. Motivation for such applications is based on findings that show robot-assisted physical therapy aids in the rehabilitation process following neurological injuries. The exoskeleton device accommodates forearm supination and pronation, wrist flexion and extension and radial and ulnar deviation in a compact parallel mechanism design with low friction, zero backlash and high stiffness. As compared to other exoskeleton devices, the RiceWrist allows easy measurement of human joint angles and independent kinesthetic feedback to individual human joints. In this paper, joint-space as well as task-space position controllers and an impedance-based force controller for the device are presented. The kinematic performance of the device is characterized in terms of its workspace, singularities, manipulability, backlash and backdrivability. The dynamic performance of RiceWrist is characterized in terms of motor torque output, joint friction, step responses, behavior under closed loop set-point and trajectory tracking control and display of virtual walls. The device is singularity-free, encompasses most of the natural workspace of the human joints and exhibits low friction, zero-backlash and high manipulability, which are kinematic properties that characterize a high-quality impedance display device. In addition, the device displays fast, accurate response under position control that matches human actuation bandwidth and the capability to display sufficiently hard contact with little coupling between controlled degrees-of-freedom.

RiceWrist Robotic Device for Upper Limb Training: Feasibility Study and Case Report of Two Tetraplegic Persons with Spinal Cord Injury

“…The mechanical design builds upon its predecessor, the MAHI Exoskeleton [14]. Jo int-space as well as task-space position controllers and an impedance-based force controller for the device have been previously developed [15]. The exoskeleton is comprised of a revolute joint for forearm rotation and a 3-Revolute Pris matic Spherical (RPS) serial-in parallel wrist (Fig.…”

A New Directional-Intent Recognition Method for Walking Training Using an Omnidirectional Robot

“…Wearable exoskeletons have been attracting interest as training systems because they offer a number of potential advantages, such as allowing the user to traverse irregular surfaces [10,11]. Because this kind of rehabilitation device surrounds the whole leg, its motion naturally follows that of the subject [12]. However, current designs are difficult to put on and pose a danger of the user falling.…”

Improvement of an Arm Exoskeleton by Data Fusion with an Inertial Measurement Unit

“…It is widely employed in tele-operation, rehabilitation and strength enhancement [1], [2], [3], [4]. The control accuracy of the exoskeleton is very important in certain applications such as robot tele-operation.…”