Design for and from Recycling: A Circular Ecodesign Approach to Improve the Circular Economy

Abstract

In the context of a circular economy, one can observe that (i) recycling chains are not adapted enough to the end-of-life products they have to process and that (ii) products are not sufficiently well designed either to integrate at best their target recycling chain. Therefore, a synergy between product designers and recycling-chains stakeholders is lacking, mainly due to their weak communication and the time-lag between the product design phase and its end-of-life treatment. Many Design for Recycling approaches coexist in the literature. However, to fully develop a circular economy, Design from Recycling also has to be taken into account. Thus Re-Cycling, a complete circular design approach, is proposed. First, a design for recycling methodology linking recyclability assessment to product design guidelines is proposed. Then, a design from recycling methodology is developed to assess the convenience of using secondary raw materials in the design phase. The recyclability of a smartphone and the convenience of using recycled materials in a new cycle are both analyzed to demonstrate our proposal. The Fairphone 2® and its treatment by the WEEE French takeback scheme are used as a case study.

The Key to Solving Plastic Packaging Wastes: Design for Recycling and Recycling Technology

“…As an important part of green design, planning for recycling can not only reduce plastic emissions but also increase the recycling of plastic waste. The main contents of the design for recycling are as follows [ 55 , 56 , 57 , 58 , 59 , 60 ].…”

A shared future: chemistry's engagement is essential for resilience of people and planet

“…Descriptions of such materials as ‘critical’ or ‘endangered’ [120] and the policy interest shown in ‘strategic’ elements [121] represent signals that resilience strategies need to be developed. Part of the solution to scarcity must come from recovery and recycling of as much material as possible, with this being built into the design of products and processes from the outset [122], with key roles being played by policies [123] as well as by S&T. Examples of the science solutions being explored include recycling of lithium from batteries [124] and of rare earth metals that are critical to many current electronic devices [125]. However, material recovery itself requires expenditure of more energy and materials, and there is always some material dispersal that makes recovery impractical (material entropy), so that recycling needs to be coupled with, or as far as possible replaced by, minimizing material consumption and waste in the first place [126].…”

Fermentation for the production of biobased chemicals in a circular economy: a perspective for the period 2022–2050

“…ref. 7). Incineration or biodegradation should only be applied when the quality of a chemical or material has decreased so much that further reuse or recycling is no longer an option (see Fig.…”