Design Guidelines for Contactless Integrated Photonic Probes in Dense Photonic Circuits

Abstract

This paper provides detailed guidelines for the optimal design of contactless integrated photonic probes suitable to track and control the local optical power in photonic circuits. With reference to current technology platforms, this paper provides a guide to extract the electrical parameters of the probe and to highlight their role in defining the achievable resolution. Crucial technological and geometrical choices are discussed, together with layout and interconnection solutions oriented to a highly dense integration of the probes. Finally, the criteria for the optimal coupling of the probes to the most suitable readout electronics providing the maximization of the SNR are presented. With these guidelines in mind, transparent in-line local power monitors featuring -35 dBm sensitivity, 40 dB of dynamic range, broadband response from 1.3 to 1.6 μm, a speed down to tens of microsecond and a minimum size of tens of micrometer can be effectively designed for high performance reconfiguration and closed-loop control of complex photonic circuits

On-Chip OSNR Monitoring With Silicon Photonics Transparent Detector

“…Results in Fig. 4 show that both sources generate the same conductance variation because of the broadband response of the CLIPP detector [9]. The accuracy of the measurement is related to the electrical bandwidth of the lock-in amplifier, i.e.…”

Challenges for Microelectronics in Non-Invasive Medical Diagnostics

“…This approach proved to be very successful in the field of radiation detection, where the silicon drift detector (SDD) outperformed other solid-state detectors in terms of noise thanks to properly-shaped electric fields, which force the collection of the generated charge (across a wide depleted detection area) to drift towards a miniaturized anode [ 15 ]. Another drawback of shrinking the electrode area is the increase in the access impedance in the case of AC-coupled sensing, both in solid-state [ 16 ] and biological applications, such as impedance flow cytometry [ 17 ].…”

Automatic Tuning of Silicon Photonics Microring Filter Array for Hitless Reconfigurable Add–Drop

“…To measure channel powers independently of either multiple optical signals or optical noise propagating simultaneously in a waveguide, one can combine the use of channel labeling and ContactLess Integrated Photonic Probe (CLIPP) [16] detectors.…”

“…The CLIPP sensor is used as sensing element to detect the light intensity in the waveguide. The sensor measures the conductance of the waveguide core, that is proportional to the light power [16]. The lock-in technique is used as detection scheme: the waveguide core is accessed capacitively with the electrodes of the sensor, placed far enough from the waveguide to avoid any perturbation in the light electric field and stimulated with a sinusoidal signal.…”