Design Hyetograph for Short-Duration Rainstorm in Jiangsu

Abstract

The rainstorm intensity formula and the design of rainstorm hyetographs are important aspects in drainage design standards. Against the backdrop of climate change, in most cities in Jiangsu Province of China, significant trends of increasing intensities of heavy rainfall are apparent. The parameters of the rainstorm intensity formula are no longer applicable in the current context of significantly stronger rainstorms. To adapt to this change, we first contrasted the fitting accuracy of the Gumbel distribution, the exponential distribution, and the Pearson III distribution for the rainstorm intensity formula in Jiangsu. It was found that the Gumbel distribution has the smallest relative mean square error in most cities, proving that it provides the best estimation of rainstorm intensity formula parameters. Therefore, the rainstorm intensity formula parameters for 13 cities was revised using the Gumbel distribution based on the rainfall data from 1991 to 2020. Then, the precipitation with a 100-year return period was calculated using the revised formula. Moreover, to compensate for the lack of storm hyetographs that have been designed for Jiangsu, we designed short-duration rainstorm hyetographs for 13 cities using the Chicago hyetograph method and the Pilgrim and Cordery (PC) method. The results show that most of the short-duration rainstorms lasted between 45 and 120 min and were dominated by single-peaked patterns, with the peak position typically occurring in the first half of the rainfall cycle. The peak coefficient distribution of short-duration rainstorms shows that short-duration rainstorms in the south reached their peak rainfall intensity earlier than those in the north. On this basis, using the Chicago method and PC method, short-duration storm hyetographs were designed, which could be used in the design of drainage systems to provide support in effectively reducing urban flood threats. By comparing the hyetographs with real short-duration rainstorm patterns, it was found that the precipitation process designed using the PC method was most similar to the actual precipitation process. However, the PC method was found to be highly dependent on local precipitation data, whereas only the rain peak coefficient is required to design the Chicago rainstorm hyetograph. Therefore, we primarily recommend hyetographs designed using the PC method for Jiangsu Province’s 13 major cities, while we recommend the Chicago hyetograph for the surrounding areas of the 13 cities that have no meteorological stations or lack data.

Resilience Assessment of Urban Distribution Network Under Heavy Rain: A Knowledge- Informed Data-Driven Approach

“…Up to now, the expression form of the basic rainstorm intensity formula in reference [26] is generally accepted,…”

“…Therefore, this paper focuses on the unimodal rainfall. On the basis of calculating the rainfall amount, the rainfall process is designed, and the designed rainfall intensity at every moment during the rainstorm is expressed as the pre-peak rainfall process and post-peak rainfall process respectively [26],…”