Design, modeling, and optimization of mechanically reconfigurable aperture antennas

Abstract

The work in this study develops the framework for placement and actuation of novel reconfigurable dual-offset contour beam reflector antennas (DCBRA). Toward that end, the methodology for the antennas' design is defined. In addition, two separate optimization problems are stated and solved: actuator position optimization and actuation value optimization. For the former, a method termed as greatest error suppression method is proposed where the position of each actuator is decided one by one after each evaluation of the error between the desired subreflector shape and the actual subreflector shape. For the second problem, a mathematical analysis shows that there exists only one optimal configuration. Two optimization techniques are used for the second problem: the simulated annealing algorithm and a simple univariate optimization technique. The univariate technique always generates the same optimal configuration for different initial configurations and it gives the low bound in the evaluation of the error. The simulated annealing algorithm is a stochastic technique used to search for global optimum point. Finally, as an example the results of the proposed optimization techniques are presented for the generation of a subreflector shape corresponding to the geographical outline of Brazil.Index Terms-Active antennas, piezoelectric devices, reconfigurable antennas.

Graphene-enabled electrically switchable radar-absorbing surfaces

“…External bias voltage or light source applied on these distributed circuit elements changes the effective length of metallic structures, which yield limited control over the reflectivity of the surface. Moreover, micro-electro-mechanical devices and mechanical actuators have been used to control microwaves by mechanical means 35,36 . Recently, graphene provides new perspective to realize adaptive surfaces.…”

Active and Morphing Aerospace Structures-A Synthesis between Advanced Materials, Structures and Mechanisms

“…These concepts are investigated further by simulations and wind tunnel investigations (Wildschek et al, 2006(Wildschek et al, , 2007. In the European study Active Control for Flexible 2020 Aircraft, they are transferred to advanced aircraft configurations such as blended-wing-body (Fig.…”

“…Therefore contact free optical methods for strain measurement during load testing and alternative methods for coefficients of thermal expansion measurements have been developed and applied. Complementary to results from Washington et al (2002), the positioning of the actuators is set to be quite regular as there is no real position preference to be expected for the very different sets of goal shapes. The displacement strokes needed to achieve the goal shapes as accurate as possible even for a high number of actuators are obtained from solving a least squares error problem between actual surface deformations or shapes generated by these strokes and the goal shapes, with technical limits of the actuator stroke amplitudes set as constrains ).…”

Deflection model for corner-supported plates with segmented in-plane actuators

“…In the last 20 years, there have been a number of advances in the modeling of piezoelectric laminate structures. In [26], the optimal placement and actuation of dual-offset contour beam reflector antennas is treated. In [27], a 1-D analytical model is introduced for a cantilevered cylindrical antenna actuated by PVDF.…”