Design of Broadband Doherty Power Amplifier Based on Misaligned Current Phase

Abstract

A broadband Doherty power amplifier (DPA) always experiences an efficiency degradation between two efficiency peaks, especially at two side bands. In this study, the efficiency degradation was demonstrated to be caused caused by the in-phase power combining at the saturation power level. To solve this problem, current misalignment was introduced into the broadband DPA design. The carrier and peaking PA have different current phases when performing the power combination at the saturation power level. In this work, it was also demonstrated that the efficiency in the high-power region of a DPA can be improved by elaborately using misaligned current phases. A detailed analysis and the design procedure of a broadband DPA are presented in this paper. And a 1.5–2.45 GHz broadband DPA was implemented and measured. The fabricated DPA achieves a saturation output power of 42.7–44.9 dBm, a saturation drain efficiency (DE) of 62.7–74.1% and a gain of 10.2–13.9 dB over 1.5–2.45 GHz. Moreover, the fabricated DPA also achieves a 6 dB back-off DE of more than 49.1% in the frequency band of interest.