This version is available at https://strathprints.strath.ac.uk/43889/ Strathprints is designed to allow users to access the research output of the University of Strathclyde. Unless otherwise explicitly stated on the manuscript, Copyright © and Moral Rights for the papers on this site are retained by the individual authors and/or other copyright owners. Please check the manuscript for details of any other licences that may have been applied. You may not engage in further distribution of the material for any profitmaking activities or any commercial gain. You may freely distribute both the url (https://strathprints.strath.ac.uk/) and the content of this paper for research or private study, educational, or not-for-profit purposes without prior permission or charge.Any correspondence concerning this service should be sent to the Strathprints administrator: strathprints@strath.ac.ukThe Strathprints institutional repository (https://strathprints.strath.ac.uk) is a digital archive of University of Strathclyde research outputs. It has been developed to disseminate open access research outputs, expose data about those outputs, and enable the management and persistent access to Strathclyde's intellectual output.FSI analysis of deformation along offshore pile structure for tidal current power abstract Due to global warming, the need to secure an alternative clean energy resource has become an international issue. Tidal current power is now recognized as one of the clean power resources in Korea, where there are many strong current regions on the west and south coasts. Recently, large scale tidal devices have been deployed with a maximum rotor diameter of 18 m. These devices impose significant loading on supporting structures. In many cases, a pile fixed foundation is used to secure the structure. However, due to the high density of seawater, the drag and lift forces are much larger than in air, causing extensive stress and deflection to the pile tower structure. In this study, a numerical analysis of the hydro-forces from a rotating tidal current turbine to a tower was conducted to determine the deformation distribution along the pile tower.