Design optimization and validation of high-performance heat exchangers using approximation assisted optimization and additive manufacturing

Abstract

The airside thermal resistance of air-to-fluid heat exchangers dominates the overall thermal resistance. On conventional heat exchanger's, fins are required to address such challenges; but their benefits are not limitless and are bound mainly by the tube size and shape. The reduction of the tube characteristic length has favorable impact on compactness and heat transfer. Conventional tubes are typically limited to round, elliptical or flat shapes which result in particular thermal-hydraulic characteristics. The current article has three main objectives. First, discuss the importance of fins on typical air-to-fluid heat exchanger's and how they become unattractive at smaller characteristic lengths with numerical analyses to support this argument from different perspectives. Second, present a proof-of-concept design with small finless tubes and a novel shape that can outperform a microchannel heat exchanger. Third, present a comprehensive analysis with shape optimization leveraging automated computational fluid dynamics simulations and approximation assisted optimization techniques. Optimum designs can achieve more than 50% reduction in size, material, and pressure drop compared to the baseline microchannel heat exchanger. The method is validated with the experimental validation of a metal three-dimensional printed prototype of the NTHX-001. The numerical simulations agreed within less than 5% in capacity, 10% in air heat transfer coefficient, and 15% in air pressure drop.

Design and finite volume evaluation of a counterflow recuperative spiral heat exchanger for additive manufacturing

“…Considering the complex fluid and thermodynamics conditions that often arise along with the geometrical optimisation, numerical and analytical simulations [7,8,9] and topology optimisation [7,10] schemes are commonly associated with the evaluation of heat exchanger designs based on the additive manufacturing applications.…”

A thermal network model for hydrocarbon heat pump systems: A coupling analysis of configuration, working condition, and refrigeration distribution

“…Sizing minimization and capacity maximization are the two optimization tasks for residential HPs with fin-and-tube heat exchangers; however, research has mainly focused on circuitry arrangement [44], tubing geometry [45], and trade-off between finless and finned surfaces [46]. The same design tasks are shared by R290 HP and conventional HPs heat exchangers focusing on size minimization, as they enable reductions in both cost and the amount of refrigerant.…”

Design and evaluation of liquid channel cross sections fabricated via metal fused filament fabrication

“…SLM can produce structures that have voids inside due to the advantageous properties of the process itself [5]. More functional and effective parts with interior channels can be obtained with parameter optimization of AM machinery [6].…”