Detection of AFB1 in corn by MXene paper‐based unlabeled aptasensor

Abstract

In this work, a paper‐based electrochemical aptamer sensor was developed for the detection of aflatoxin B1 (AFB1) using a combination of MXene–Ti3C2Tx and nucleic acid aptamers. The prepared single‐layer or few‐layer MXene suspension is suction‐filtered onto MXene paper, which is cut to prepare MXene electrodes. To accomplish AFB1 specific detection, an amino‐labeled AFB1 aptamer is mounted on the surface of the carboxy‐functionalized MXene electrode. When AFB1 is present, it particularly binds to the aptamer to form a 3D structure, reducing the efficiency of electron transmission on the sensor surface. The difference in impedance signal change at the electrode/electrolyte interface is used to quantify AFB1. The results indicated that the detection range is 0.05–100 ng/mL, the detection limit is 0.04 ng/mL, and the recovery rate of AFB1 in corn samples is 97.8%–111.52% with the optimal detection conditions. The MXene paper‐based label‐free aptasensor is versatile and can detect different targets by simply swapping out the aptamers of different targets. The sensor also has a wide range of applications in food analysis and environmental testing.Practical applicationsA paper‐based electrochemical aptamer sensor was developed to detect aflatoxin B1 using a combination of MXene–Ti3C2Tx and nucleic acid aptamers.The design is based on the preparation of MXene electrodes by pumping and filtering monolayer or multilayer MXene suspensions onto MXene paper and cutting.The MXene paper‐based label‐free aptamer sensor was designed to be versatile, allowing the detection of different targets by simply replacing the aptamer with one from a different targets.