The pore structure
and movable fluid characteristics of tight conglomerate
reservoirs are complex, which are greatly different from conventional
reservoirs. The depositional mechanism is the fundamental factor controlling
the physical properties of conglomerate reservoirs. However, there
is a lack of systematic research on the pore structure and movable
fluid characteristics of conglomerate reservoirs with typical sedimentary
facies. This paper investigates the pore structure and movable fluid
characteristics of conglomerate of different sedimentary facies based
on various experiments. Casting thin sections, X-ray diffraction,
scanning electron microscopy, high-pressure mercury injection, and
nuclear magnetic resonance experiments were conducted on 32 conglomerates
samples from the Mahu Sag, Junggar Basin, China. The quality classification
method of tight conglomerate reservoirs is established. The results
show that the conglomerate can be divided into three sedimentary facies;
traction flow conglomerate (TFC) and pebbled sandstone (PSS) mainly
develop intergranular pores and dissolved pores; and the pore diameter
curves are mainly a double peak, single peak, and flat peak. Gravity
flow conglomerate (GFC) mainly develops dissolved pores and interstitial
micropores, and the pore diameter curve is mainly a single peak. PSS
includes pebbled gritty sandstone (P(G)SS) and pebbled fine sandstone
(P(F)SS). TFC and P(G)SS are favorable class I reservoirs, while GFC
and P(F)SS are nonfavorable class II reservoirs. A new parameter,
the ratio of the major axis to the minor axis of the pore outer ellipse
(axial ratio), is proposed to quantitatively describe the compaction
effect. The average axial ratios of the three lithofacies are 3.04,
3.98, and 8.78, respectively, indicating that the compaction is intensified
and the pore structure becomes worse. By analyzing the correlation
between pore structure parameters and permeability, it is found that
the main controlling factors of permeability of GFC and TFC are sorting
and connectivity, respectively, and the main flow radius is the most
suitable parameter to describe permeability. A linear spectral decomposition
method was used to establish a new quantitative calculation method
of movable fluid saturation for different types of pores, and the
results show that the movable fluid saturation of intergranular pores
is the highest (average: 65.43%), and the movable fluid saturation
of TFC and P(G)SS with more intergranular pores is the highest. Movable
fluid saturation is inversely proportional to the content of I/S and
the compaction rate and positively proportional to the content of
quartz and feldspar and the cementation rate. The fluid mobility of
water-wet samples is weaker. The research results provide theoretical
support for the identification of favorable reservoirs and the cognition
of a development mechanism.