Determination of the Degree of Mixing in Multicomponent Ceramic Powder Compacts by Micro‐Raman Spectroscopy

Abstract

Powder compacts of TiO 2 and ZrO 2 were prepared from their suspensions in water at different pH values, and micro-Raman spectroscopy was used to reveal the degree of mixing in each of them, with different sizes of the focused laser spot. The change in laser intensity and particle-size distributions led to a slight variation in the average composition, as determined using three different probe sizes. The Raman-estimated volume fractions of each constituent indicated that the aqueous suspensions in which the powders were well dispersed produced the most-uniform mixing. Powders that were flocculated in suspensions before mixing also resulted in a good mixture. The most-nonuniform mixing was observed when, in the individual suspensions, one of the constituents was dispersed and the other was flocculated. These results indicated that Raman spectroscopy can be useful for the rapid determination of the degree of mixing in powder mixtures.

Studies on ferroelectric perovskites and Bi‐layered compounds using micro‐Raman spectroscopy

“…Spatially resolved Raman spectroscopy can be used to probe the chemical homogeneity at sub-micrometer levels. 16 If stress is present in the material it is possible to provide an estimation of it since the phonon frequencies are strongly influenced by the presence of stress. Raman scattering can therefore be utilized to monitor the structural and chemical factors that are important in order to optimize the property coefficients.…”