Determining Position and Orientation of a 3-Wheel Robot on a Pipe Using an Accelerometer

Abstract

Accurate positioning of robots on pipes is a challenge in automated industrial inspection. It is typically achieved using expensive and cumbersome external measurement equipment. This paper presents an Inverse Model method for determining the orientation angle (α) and circumferential position angle (ω) of a 3 point of contact robot on a pipe where measurements are taken from a 3-axis accelerometer sensor. The advantage of this system is that it provides absolute positional measurements using only a robot mounted sensor. Two methods are presented which follow an analytical approximation to correct the estimated values. First, a correction factor found though a parametric study between the robot geometry and a given pipe radius, followed by an optimization solution which calculates the desired angles based on the system configuration, robot geometry and the output of a 3-axis accelerometer. The method is experimentally validated using photogrammetry measurements from a Vicon T160 positioning system to record the position of a three point of contact test rig in relation to a test pipe in a global reference frame. An accelerometer is attached to the 3 point of contact test rig which is placed at different orientation (α) and circumferential position (ω) angles. This work uses a new method of processing data from an accelerometer sensor to obtain the α and ω angles. The experimental results show a maximum error of 3.40° in α and 4.17° in ω, where the ω circumferential positional error corresponds to ±18mm for the test pipe radius of 253mm.

Robotic Positioning for Quality Assurance of Feature-Sparse Components Using a Depth-Sensing Camera

“…Novel techniques of localized crawler positioning are available with the challenge simplified through priori knowledge of the industrial asset [14], [15], achieving accuracies of 5-10 mm from the desired position. These setups also benefit from using small on-board sensors which offer flexible functionality at a low cost when compared to high accuracy, external alternatives such as photogrammetry [16] and laser based systems [17].…”

Sensor-Enabled Multi-Robot System for Automated Welding and In-Process Ultrasonic NDE

“…In addition, their compact size makes them well suited for remote applications with constrained access [ 4 ]. One particular challenge with such crawlers is accurately tracking their position, which is achieved through a combination of drive encoders, accelerometers, machine vision and in often cases expensive external measurement systems [ 10 ]. Multirotor aerial vehicles can deliver visual [ 11 ], laser and, more recently, contact ultrasonic [ 12 ] sensors in remote NDE inspection scenarios, where a magnetic crawler could not be deployed.…”

Safe Position Detection Based on Safety System-on-Chip (SSoC) for Wireless IoT Application

“…One of the approaches for safe operation in industrial robotic systems according to the ISO/TS 15066 standard is the limitation of force, speed and workspace [8]. With the approach of working within a limit, many applications today monitor a work area for the robotic arm by means of Radio-Frequency Identification (RFID) tags [9], proximity [10,11], positioning [12,13] and vision based system [14]. In the positioning approach, the robot system may only be active within its predefined workspace.…”