Development and heat transfer analysis of thermoelectric self‐powered fuel‐fired residential boiler

Abstract

Solid-state thermoelectric (TE) devices offer many interesting features compared with other methods of generation, such as no moving parts, high reliability, low maintenance, and straightforward integration with other heating equipment. In this study, a thermoelectric assembly was integrated into a residential heating boiler to convert a portion of combustion heat to electricity while meeting space and/or water heating needs. A prototype was developed, in which recently developed thermoelectric modules were incorporated into a gas-fired boiler. The electricity generated by the thermoelectric assembly would be sufficient to power the electrical auxiliary components of the heating system. In this way, the heating system could operate entirely on fuel combustion and provide the consumer with heating system reliability and a reduction in power consumption. A model for the thermoelectric conversion system was established and the thermal resistance analysis was carried out to show the influence of heat transfer coefficients and other parameters on power output and efficiency, and thus improve the system design. In this study, the single-module integrated assembly can produce a 22.5 W power output. However, each module of the four-/eight-module integrated assembly can only generate a power output of 7.85/9.175 W on average. The performance of a single module in a multimodule assembly is worse than that of a single module assembly. The number of modules placed on the furnace wall is not as many as possible but has an optimal value. In this experimental environment, the assembly of eight modules is the optimal choice. Furthermore, it is found that enhancing combustion-side heat transfer capacity is an effective way to promote system performance. The power output of the assembly composed of four modules will increase by 70% from 7.85 to 13.5 W due to the installation of the fin on the hot end.

Derivation of generalized thermoelectric energy equations and the study of thermoelectric irreversible processes based on energy, exergy, and entransy analysis

“…A detailed discussion of the heat loss from the TE legs to the ambient can be found in the author's previous work 21 . Relevant theoretical analysis 22 and experimental study 20 can also be referred to.…”

“…Since no literature has been published on the entransy analysis of thermoelectric systems, the work in this paper is exploratory and cutting-edge, and is a continuation of the authors' previous work. 20…”

“…This paper attempts to integrate the efficiency analysis of energy conservation (the first‐law‐based thermodynamic analysis), the exergy analysis of energy grade (the second‐law‐based thermodynamic analysis), and the specially introduced “entransy” analysis which aims to evaluate the heat transfer capability and efficiency, to explore the intrinsic mechanism and unique characteristics of thermoelectric conversion compared with traditional energy conversion from a multidimensional perspective, and to establish a multidimensional evaluation system for thermoelectric conversion that can fully reflect the above connotations, so as to provide a guide for the evaluation and optimization of thermoelectric power systems. Since no literature has been published on the entransy analysis of thermoelectric systems, the work in this paper is exploratory and cutting‐edge, and is a continuation of the authors' previous work 20 …”