Development and Investigation of a Grasping Analysis System with Two-Axis Force Sensors at Each of the 16 Points on the Object Surface for a Hardware-Based FinRay-Type Soft Gripper

Abstract

The FinRay soft gripper achieves passive enveloping grasping through its functional flexible structure, adapting to the contact configuration of the object to be grasped. However, variations in beam position and thickness lead to different behaviors, making it important to research the relationship between structure and force. Conventional research using FEM simulations has tested various virtual FinRay models but replicating phenomena such as buckling and slipping has been challenging. While hardware-based methods that involve installing sensors on the gripper and the object to analyze their states have been attempted, no studies have focused on the tangential contact force related to slipping. Therefore, we developed a 16-way object contact force measurement device incorporating two-axis force sensors into each of the 16 segmented objects and compared the normal and tangential components of the enveloping grasping force of the FinRay soft gripper under two types of contact friction conditions. In the first experiment, the proposed device was compared with a device containing a six-axis force sensor in one segmented object, confirming that the proposed device has no issues with measurement performance. In the second experiment, comparisons of the proposed device were made under various conditions: two contact friction states, three object contact positions, and two object motion states. The results demonstrated that the proposed device could decompose and analyze the grasping force into its normal and tangential components for each segmented object. Moreover, low friction conditions result in a wide contact area with lower tangential frictional force and a uniform normal pushing force, achieving effective enveloping grasping.