Development and Verification of Mechanism for Enhancement of Steering Angle and Active Locomotion for Magnetic Micro Active-Guidewire

Abstract

In this study, the authors developed a novel active guidewire including a spiral-type magnetic microrobot and ball joint to realize active locomotion and improve the steering capability within external magnetic fields. Most active guidewires provide only steering ability without active locomotion, and their steering angles depend on the physical properties of the wire. The developed mechanism provides a wider range of steering angles because the total steering angle is the sum of the joint angle and wire angle. To evaluate the performance of the proposed mechanism, we compared and analyzed the steering and active locomotion in a dc field and rotating magnetic field in conditions involving and not involving the ball joint mechanisms. At a low magnetic field strength (up to 4 kA/m), considerable improvement in the steering angle owing to the use of the ball joint was noted. The dc and rotating fields with an intensity of 8 kA/m generated peak steering angles of 189 • and 135 • , respectively. Various experiments were conducted, and the results confirmed that the proposed mechanism could improve the steering ability while realizing active locomotion. In particular, the steering stability and movement ability corresponding to different types of magnetic fields could be analyzed. INDEX TERMS Active guidewire, ball joint, spiral-type magnetic microrobot, steering ability, electromagnetic field control.

Reprogrammable Soft Swimmers for Minimally Invasive Thrombus Extraction

“…The concept of the experiments is the penetration of the clot by the programmed magnetic soft robot under the action of the rotating magnetic field (the field amplitude is 10 mT, the field frequency is 40 Hz in X and Z directions), using the screwing technique, ,, and then the unaided extraction of the swimmer with the clot from the vein-mimicking system due to the self-propelled nature of the material (see the SI Section: Thrombus Extraction Experiments). The snapshot in Figure E and Movie S5 demonstrates the main steps of the thromboextraction without thrombolytics: the insertion of the robot into the vein-mimicking tube (0 min), penetration and hook of the model fibrin clot (3 min), and further extraction of the clot from the vessel by self-propulsion of the swimmer with the hooked clot (5 and 7 min).…”

Magnetically Actuated Continuum Medical Robots: A Review

“…Drilling motion is one of the widely studied functionalities. [70,72,81,[162][163][164][165] For example, Yang et al developed a driller-tipped magnetic guidewire for peripheral vascular disease (PVD) treatment. The guidewire consisted of a magnetic driller tip, elastic neck, and base shaft (Figure 11a).…”

“…Jeon et al proposed a magnetic micro active‐guidewire composed of a ball joint and spiral‐type magnetic microrobot. [ 164 ] The designed ball joint could provide an additional joint angle of up to 45° without wire deformation, providing a larger steering angle that was the sum of the joint and wire angles. Both directional magnetic field‐driven and rotating magnetic field‐driven modalities were analyzed and experimentally validated.…”

Electromagnetic Manipulation System for Semi-Autonomous Control of Small-Scale Magnetic Objects With Sequential Programming

“…Magnetic actuation systems can be used to precisely manipulate magnetic microrobots [25]- [28]. Hoshiar et al used a steering algorithm to control a flexible guidewire microrobot along a complex arbitrary path, spelling out the letters "BMR" [29].…”