Development of a distributed wireless Wi-Fi system for monitoring the technical condition of remote objects

Abstract

The research addresses the issues of collection and transmission of measurement data when monitoring various construction objects and bridge structures. The issues were resolved by developing a distributed system using Wi-Fi technologies. The results of measurements of the following parameters and data were obtained: the distance between cracks and joints, magnetometer readings and location and possible inclination of objects in three axes according to accelerometer and gyroscope data. By configuring the server, new channels are created for receiving data, which allow their subsequent processing and complete analysis of the study, for example, to solve the problem of predicting the technical conditions of construction and bridge objects. The completeness of the analysis of the study solves the problem of identifying and detecting possible errors and determining delays in the communication system. In general, the validity of all research results plays an important role in predicting the technical conditions of various objects and in finding solutions to problems arising from the technical difficulties of remote control. In this regard, the issue of the validity of the choice of Wi-Fi modules, which take into account the parameters of power consumption and availability of the boards of these modules for programming in order to obtain results of measurements in a long time has been posed and resolved. Setting power consumption parameters made it possible to increase the research time at remote sites, which in turn increases the durability and life of the control system. The simplicity of programming the module boards and support of various electronic sensors allow varying the scope and research objects, thereby expanding the geography of the subject area of research. Therefore, the developed distributed system is easily adapted to the necessary problem areas of research, the monitoring results of which can be used in many areas, such as agriculture, ecology, power, health care, meteorology

Developing the GoogleNet neural network for the detection and recognition of unmanned aerial vehicles in the data Fusion System

“…With the help of a PTZ camera, a dataset of 75 images from 5 range classes was prepared. Data transmission and storage was carried out using the method described in [34] According to the results of the study, the neural network in images where the object was at a distance of no more than 5 meters from the optical camera is able to recognize drones with a probability of 98.13 %. A slight decrease in the probability of object recognition was found as the UAV moves away from the camera, which is confirmed by the results obtained:…”

Remote Monitoring and Intelligent Failure Diagnosis of Rotating Machinery Using the B/S Mode

“…The phase angle difference proposed here refers to the difference between the measured vibration displacement, vibration velocity or vibration acceleration signals of two points. The phase angle difference of the failure rotor is compared with that of the normal rotor to judge whether the rotor system is in failure and what failure occurs [20].…”

Использование Технологии Wi-Fi Для Сбора И Передачи Данных Температуры И Влажности

“…Рисунок 7 -Полученные данные температуры на сервере и отображение результатов в виде графика и цифрового индикатора Рисунок 8 -Полученные данные влажности на сервере и отображение результатов в виде графика и измерительного прибора «Gauge» Получение (сбор) данных является основной частью разрабатываемой беспроводной системы мониторинга, но стоит так же отметить важность дальнейшей обработки полученных данных (9 рисунок). Сервер, используемый в данной работе, позволяет экспортировать данные в 3 форматах (форматы jcon, xml страницы и файла excel), для удобства дальнейшей обработки результатов, для проведения полноценного исследования и анализа, с целью выявления динамики изменения данных и своевременного обнаружения неисправности для проведения корректирующих мер [9][10]. Построение зависимости результатов температуры и влажности при помощи моделирования в программной среде MatLab: после экспортирования результатов измерения можно приступать к обработке полученных значений и проведению моделирования по полученным результатам, как указано на рисунке 10.…”