Development of an Evaluation Method for Seismic Isolation Systems of Nuclear Power Facilities: Part 1 — The Work Schedule of Project and a Seismic Design of Crossover Piping System

Abstract

This paper provides a part of series of “Development of an Evaluation Method for Seismic Isolation Systems of Nuclear Power Facilities” [1]–[4]. This part describes the work schedule of this project and the summary of a seismic design for crossover piping system. Since the Southern Hyogo Prefecture Earthquake in 1995, a seismic isolated design has been widely adopted for Japanese typical buildings. The Japanese government accepted utilizing seismic isolation technology for nuclear power facilities with the 2006 revision of the “Regulatory Guide for Reviewing Seismic Design of Nuclear Power Reactor Facilities”. Under these backgrounds, the Japan national project with the participation of all electric power companies and reactor vendors has been started from 2008 to develop seismic isolation systems of nuclear power facilities under the support of the Ministry of Economy, Trade and Industry. In the design of seismic isolated plant, the crossover piping systems, such as Main Steam line and other lines related to the safety system have the important roles for overall plant safety. Therefore, the design of multiply supported piping systems between isolated and non-isolated buildings is one of the major key issues. This paper focuses on the seismic response analysis of Main Steam crossover piping between seismic isolated Reactor Building and non-isolated Turbine Building. Multiple input response spectra and time history analyses of the crossover piping have been performed and the structural integrity of piping and the validity of the multiple input analysis method have been verified based on comparisons with the results obtained by conventional response spectrum analysis using enveloped floor response spectrum.