Development of platinum supported on single-walled carbon nanotubes by deposition-precipitation for microbial fuel cells

Abstract

Microbial fuel cells (MFCs) are an ecologically friendly technology that can recover electricity and simultaneously treat wastewater. Among all the influential factors, cathode material and catalyst play a crucial role in electricity production and oxygen reduction. In this study, Pt nanocatalysts deposited on single-walled carbon nanotubes (Pt/SWCNTs) were synthesized by the deposition-precipitation (DP) method under optimal conditions. The results show that DP might be a promising method for the preparation of Pt/SWCNTs due to its simple, cost-effective and time-saving procedure, in addition to being highly efficient at creating small Pt particles (0.9 nm) that were very uniformly distributed. The synthesized Pt/SWCNTs suspension was spray-coated on to carbon cloth and then used as a cathode for MFCs. The electricity generation of MFCs equipped with a Pt/SWCNTs cathode was evaluated in terms of open circuit voltage (0.6954 V), internal resistance (63.3 Ω•m) and maximum power density (2,022 mW/m). The chemical oxygen demand removal, biological oxygen demand removal, total dissolved solids removal, total suspended solids removal and silver recovery was satisfactory at 84.5%, 74.0%, 45.7%, 60.0% and 99.0%, respectively. Therefore, Pt/SWCNTs from the DP method was identified as a potential candidate to replace commercial Pt-carbon cloth for MFC cathodes.