Assessing the mechanical properties of CFRP and aluminum specimens exposed to hygrothermal aging is vital. Moreover, it is important to develop strategies to improve these properties. This study examines the influence of fullerene and Single‐Walled Carbon Nanotubes (SWCNT) on the fatigue life and static strength of bonded and bonded/bolted joints. The research concentrates on composite‐to‐composite and composite‐to‐aluminum substrates under three‐point bending tests, both prior to and after hygrothermal aging. The samples were classified into four groups: (1) neat specimens, (2) specimens with added fullerene, (3) specimens containing SWCNT, and (4) specimens with a blend of 50% SWCNT and 50% fullerene.The findings indicated that the optimal nanoparticle ratio for bonded joints differs from that for bonded/bolted joints. Incorporating nanoparticles into the adhesive enhanced the fatigue life of single lap joints (SLJs), particularly in samples with mixed particles and SWCNT. In some instances, nanoparticles intensified the effects of hygrothermal conditions, further increasing fatigue life. The incorporation of nanoparticles and the use of bonded/bolted joints significantly enhanced joint strength, with the combination of both yielding the best results. This study improves the understanding of aging in adhesive and hybrid joints, particularly in dissimilar configurations, and offers insights into their performance under various environmental conditions.Highlights
Study examines fullerene and SWCNT impacts on CTC/CTA joint strength and fatigue.
Optimal nanoparticle ratios differ for bonded and bonded/bolted joints.
Nanoparticles reduce moisture absorption, aging damage, and increase failure load.
Nanoparticles enhance fatigue life, varying by type, volume, load, and joint.
Incorporating nanoparticles significantly improves joint strength.
