Search citation statements
Paper Sections
Citation Types
Year Published
Publication Types
Relationship
Authors
Journals
The kinetics of oxidation of metallic fuels by metal oxides involve some of the most important parameters determining the utility of any metal oxide system in pyrotechnic applications. An attempt has been made to study the oxidation of Ta metal by strong oxidizers such as PbO~ and Pb30,l, employing differential thermal analysis and infrared spectroscopy. The rate of oxidation of Ta increases with increasing oxidizer content in both Ta--PbO2 and Ta--Pb304, systems. A tentative mechanism for the observed phenomenon is proposed.A metal oxidant composition is used as the main part of a pyrotechnic delay column in fuses. The delays required in the fuses may range from a few seconds to a few milliseconds. The kinetics of oxidation of the metal fuel, which are determined predominantly by the oxidizer employed, control the delay timings. Though any metal -oxidizer system is potentially an effective delay composition, metals such as Si, Zr, Ni, Mo, Ti, B and W in conjunction with oxidizers such as chromate, chlorate, nitrate, perchlorate, Fe203 and Pb~O4 have been suggested for use. Many of the above metals yield oxides of varying stoichiometry and the kinetics will therefore be highly susceptible to changes in the oxidizer and the oxidizer content. Hogan and Gordan [1] were among the first to apply thermal methods to a systematic study of a pyrotechnic delay system. Charsley et al. [2,3] have described the kinetics of oxidation of B and W by oxidizers such as K2Cr207 and MoQ, employing thermal analysis and temperature profile measurements Nagaishi et al, [4] found during their studies on the combustion of W by KC104 in the presence of an auxiliary oxidizer BaCrO4 that different conditions of energy supply can cause apparent inconsistencies in the ignition time recorded in the different thermal methods.Ta on the other hand always yields TarO5 in an oxidizing atmosphere, the oxidation reaction being reported to be highly exothermic. Since no information is available in the literature on the system Ta + strong oxidizers, we have investigated the systems Ta + PbO2 and Ta + Pb30~, employing DTA and infrared spectroscopy, the results of which are described in this communication.
The kinetics of oxidation of metallic fuels by metal oxides involve some of the most important parameters determining the utility of any metal oxide system in pyrotechnic applications. An attempt has been made to study the oxidation of Ta metal by strong oxidizers such as PbO~ and Pb30,l, employing differential thermal analysis and infrared spectroscopy. The rate of oxidation of Ta increases with increasing oxidizer content in both Ta--PbO2 and Ta--Pb304, systems. A tentative mechanism for the observed phenomenon is proposed.A metal oxidant composition is used as the main part of a pyrotechnic delay column in fuses. The delays required in the fuses may range from a few seconds to a few milliseconds. The kinetics of oxidation of the metal fuel, which are determined predominantly by the oxidizer employed, control the delay timings. Though any metal -oxidizer system is potentially an effective delay composition, metals such as Si, Zr, Ni, Mo, Ti, B and W in conjunction with oxidizers such as chromate, chlorate, nitrate, perchlorate, Fe203 and Pb~O4 have been suggested for use. Many of the above metals yield oxides of varying stoichiometry and the kinetics will therefore be highly susceptible to changes in the oxidizer and the oxidizer content. Hogan and Gordan [1] were among the first to apply thermal methods to a systematic study of a pyrotechnic delay system. Charsley et al. [2,3] have described the kinetics of oxidation of B and W by oxidizers such as K2Cr207 and MoQ, employing thermal analysis and temperature profile measurements Nagaishi et al, [4] found during their studies on the combustion of W by KC104 in the presence of an auxiliary oxidizer BaCrO4 that different conditions of energy supply can cause apparent inconsistencies in the ignition time recorded in the different thermal methods.Ta on the other hand always yields TarO5 in an oxidizing atmosphere, the oxidation reaction being reported to be highly exothermic. Since no information is available in the literature on the system Ta + strong oxidizers, we have investigated the systems Ta + PbO2 and Ta + Pb30~, employing DTA and infrared spectroscopy, the results of which are described in this communication.
The author investigated a two-component pyrotechnical mixture used in the manufacture of delay detonators. Comparing the thermogravimetric, derivative thermogravimetric and differential thermal analysis curves of components with that of mixtures containing the components in different ratios, a relation has been found between the reaction rate and ratio. Initial temperature of reaction can be defined as well. Release of oxygen and oxidation takes place separately at certain temperatures and ratios. Mixture of highest rate of reaction generates the lowest heat of reaction.In the last twenty years delay detonators have been widely employed in blasting techniques to improve the efficiency of blastings [1, 2]. As delay elements usually pyrotechnical mixtures are used, containing combustible, oxidants, inhibitor and binding material [3,4]. Their speed of combustion can mostly be controlled empirically, by variation of the composition and grain size. Since the combustion time, delay effect and the reaction mechanism are closely related, it is hoped that the study of the latter during combustion will help in designing and adjusting the timing of delay detonators. The differential thermal analysis of pyrotechnical mixtures has been described [5][6][7]. If the behaviour of the components with increasing temperature is known, changes in the behaviour of mixtures indicate reactions among the components. When dealing with several components, it is necessary to investigate mixtures of various ratios of two, three, etc., components by means of the Derivatograph [8]. In the present paper it is intended to demonstrate this method on data referring to a mixture containing one oxidant and one combustible. ExperimentalThe tests have been carried out with a MOM Derivatograph using a ceramic specimen holder. Combustible: FeSi90 of technical grade (made by 13tv6zetgy~tr, Zagyvar6na, Hungary). Oxidant: MnO 2 of mineral grade (pyrolusite homogenized by AKZO, Amsterdam).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.