Dilution of Precision (DOP) Factors for Evaluating Observations to Galileo Satellites with VLBI

Abstract

Installing a VLBI transmitter on Galileo satellites will allow observing satellites in parallel to quasars with Very Long Baseline Interferometry (VLBI) telescopes. This offers a variety of new applications such as the direct determination of the absolute orientation of the satellite constellation with respect to the International Celestial Reference Frame (ICRF) and the improvement of the Terrestrial Reference Frame (TRF) exploiting the possibilities of direct high precision tying of the different space geodetic equipment. In preparation of these observations by enhancing the capabilities of the VLBI scheduling program VieSched++, we perform an evaluation study of observations of a Galileo satellite employing Dilution of Precision (DOP) factors. The idea is to introduce DOP factors in the decision process of VieSched++ after a thorough assessment of DOP factors for individual parameters. In our study, we choose an existing network of VLBI Global Observing System (VGOS) type telescopes for observing Galileo satellite GSAT0212 within a 24 h arbitrary session. Preparing the DOP factor analysis, we first carry out a theoretical study to investigate the VLBI sensitivity to satellite orbit displacements in the local orbital frame with normal (radial), tangential and cross-track direction. This analysis shows that the highest sensitivity of a satellite observation is that of the tangential component if the direction of the satellite track is parallel to the direction of the observing baseline. A satellite observation is most sensitive towards the cross-track component if these two directions are orthogonal to each other. The DOP factor analysis itself is performed separating the satellite position again into its three components and adding a separate DOP factor for the UT1-UTC (dUT1) parameter. The periods, where satellite observations are possible, were determined using VieSched++. At a later stage, these DOP factors will be used as an optimization criterion for the scheduling process. The DOP factors of potential observations from the chosen VGOS network to GSAT0212 reach minimum DOP values of 27.13 in normal, 1.49 in tangential, and 1.67 in cross-track direction and 0.45 for determining dUT1. With these results, which have confirmed intuitive considerations on the relative magnitudes, we have laid the groundwork for using DOP factors as driving criteria in the scheduling process of Galileo satellites embedded in regular VLBI observations of quasars.

Effect of station selection on VLBI-to-GNSS orientation transfer using space-ties onboard a next generation Galileo satellite

“…Anderson et al [4] examined the tie accuracy between spacecraft and VLBI frames through Monte-Carlo simulations of onboard VT observations, comparing spacecraft coordinates in two frames. In separate studies, Wolf et al [12] and Sert et al [13] simulated onboard-Galileo VT observations in Intensive VLBI sessions to estimate the ascending node of the satellite orbit and to evaluate the formal precision of transferring UT1-UTC information to the Galileo station network. Wolf and Böhm [14] examined Galileo space ties in terms of the accuracy of frame ties by simulating VT observations for different Galileo satellites and checking the ground station repeatabilities.…”