Direct active damping control for grid‐connected AC/DC converter with LCL filter using augmented look‐up table

Abstract

This paper presents a novel approach to adapt the conventional direct power control (DPC) methods that are applied to ac/dc converters with an inductive capacitive inductive (LCL) filter. These new solutions improved the conventional DPC with an active damping algorithm via multi‐variable constraint adjustment, which is based on an augmented look‐up table and multi‐variable comparators. The novel look‐up table proposed for the active damping algorithm of the LCL filter allows an optimal voltage vector assignment to be chosen using differences in converter‐side current and capacitor voltage. This method is also compared with the DPC method with active damping via the addition of a virtual damping resistor and a harmonic rejection loop. The steady‐state (total harmonic distortion of the grid current) and dynamic performances (response time on step changes of the set current), as well as the immunity under distorted grid voltage conditions of the proposed system, are verified through simulation results and experimental measurements.

Predictive load‐feedforward control for DC‐link voltage suppression and dynamic improvement of battery charging and discharging converter

“…A bidirectional AC-DC converter [14][15][16] is an important component of battery charging and discharging equipment. Battery charging and discharging converter usually consists of a front stage AC/DC converter and a back stage DC/DC con-verter to achieve high efficiency.…”

Bypass Inductor Type LCL Filter Parameter Optimization for Three-Level Grid-Connected Converter

“…This study proposes an engineering design method of LCL filter based on passive control strategy (Zhang et al, 2021). The proposed method first analyzes the significance of resonance frequency in reactive power compensation and harmonic reduction (Xiong et al, 2021a).…”