Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing this collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information , 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. (From -To) 14-09-2004 to 14-09-2007
REPORT DATE (DD-MM-YYYY)
01-12-2007
REPORT TYPE
Final Report
DATES COVERED
TITLE AND SUBTITLE
Detection of Nuclear Explosions Using Infrasound Techniques
A1
PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES)Research School of Earth Sciences The Australian National University Canberra, A.C.T. 0200 Australia
PERFORMING ORGANIZATION REPORT NUMBER
SPONSORING / MONITORING AGENCY NAME(S) AND ADDRESS(ES)Air Force Research Laboratory 29 Randolph Rd. Hanscom AFB, MA 01731-3010
SPONSOR/MONITOR'S ACRONYM(S)AFRL/RVBYE
SPONSOR/MONITOR'S REPORT NUMBER(S)AFRL-RV-HA-TR-2007-1151
DISTRIBUTION / AVAILABILITY STATEMENTApproved for Public Release; Distribution Unlimited.
SUPPLEMENTARY NOTES
ABSTRACTThe performance of typical IMS infrasound monitoring stations has been examined in detail in order to evaluate the detection capability of the global network for regional and distant nuclear explosions. Three significant problems have been identified: a) problems with the loss of higher frequency signal components in the primary monitoring passband, b) detection problems associated with a low degree of signal coherence between array elements and c) problems with high levels of wind-generated background noise. Loss of higher frequency signal components normally occurs when signal propagation is restricted to a thermospheric waveguide. This problem can often be resolved by ensuring that routine processing algorithms include a long-period passband. Coherence studies show that detection capability for regional and distant explosions may be limited by the small degree of signal correlation between array elements. This problem can be resolved by modifications to the array configuration. Wind-generated background noise is a potentially serious problem at most infrasound monitoring stations. We have developed a new wind-noise-reducing system that effectively eliminates wind-generated noise in the monitoring passband. This system is based on the use of a closed screened enclosure that mechanically degrades turbulent eddies in the atmospheric boundary layer. This system can be used as an effective, stand-alone wind-noise-reducing system that d...