Domain Switching in BaTiO₃ Films Induced by an Ultralow Mechanical Force

Abstract

Low-energy switching of ferroelectrics has been intensively studied for energy-efficient nanoelectronics. Mechanical force is considered as a low-energy consumption technique for switching the polarization of ferroelectric films due to the flexoelectric effect. Reduced threshold force is always desirable for the considerations of energy saving, easy domain manipulation, and sample surface protection. In this work, the mechanical switching behaviors of BaTiO3/SrRuO3 epitaxial heterostructure grown on Nb:SrTiO3 (001) substrate are reported. Domain switching is found to be induced by an extremely low tip force of 320 nN (estimated pressure ∼0.09 GPa), which is the lowest value ever reported. This low mechanical threshold is attributed to the small compressive strain, the low oxygen vacancy concentration in BaTiO3 film, and the high conductivity of the SrRuO3 electrode. The flexoelectricity under both perpendicular mechanical load (point measurement) and sliding load (scanning measurement) are investigated. The sliding mode shows a much stronger flexoelectric field for its strong trailing field. The mechanical written domains show several advantages in comparison with the electrically written ones: low charge injection, low energy consumption, high density, and improved stability. The ultralow-pressure switching in this work presents opportunities for next-generation low-energy and high-density memory electronics.

Giant Electroresistance in Ferroelectric Tunnel Junctions via High-Throughput Designs: Toward High-Performance Neuromorphic Computing

“…The curvature radius of the probe tip is 33 nm. The probe was calibrated using the “GetReal” procedure of the Asylum software to ensure the unity of the inverse optical lever sensitivity and the spring constant of the probe in the test process …”

“…The probe was calibrated using the "GetReal" procedure of the Asylum software to ensure the unity of the inverse optical lever sensitivity and the spring constant of the probe in the test process. 33 Electrical Measurements. A Keithley 2450 source meter with homemade programs and an ArC ONE system were used to measure the electrical properties of the junctions.…”

Recent Progress on Barium Titanate‐Based Ferroelectrics for Sensor Applications

“…devised a novel structural solution. [ 42 ] Their approach involved the insertion of an ultra‐thin strontium titanate (STO) dielectric layer, augmenting the ferroelectric properties of the device. This enhancement significantly improved the memory‐switch ratio.…”

Phase Conductance of BiFeO3 Film

“…In the epitaxial heterostructure of BaTiO 3 /SrRuO 3 , domain switching induced by a tip force of 320 nN was reported. This low mechanical threshold was related to the small compressive strain, the low oxygen vacancy concentration in the BaTiO 3 film, and the high conductivity of the SrRuO 3 electrode [14]. Recently, ferroelectric domains in PMN-PT crystals were found to be manipulated using an optical method [15].…”